Jump to content
SAU Community

Recommended Posts

hey guys.

i'm putting rear speaker in, and i'm 'trying' to make a custom rear parcel shelf.

just wondering how the rear parcel shelf is removed (the board with carpet on it where your're speakers go). I had a quick go at it but it looked like it was going to break and i'm not one to force things if i don't know exactly how it works. do you have to removed the back seats? If so, whats the best way to removed the back seat?

any help will be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/27276-rear-parcel-shelf-removal/
Share on other sites

Yes remove the back seats. The bottom part of the seat has a couple of bolts that need to be taken out then grab each end of the seat about 300mm from each end and give it a swift hard yank, this will unlock the two clips under there. There are two more bolts for the back part of the seat, take these out then remove seat. The rear shelf, from memory, then just lifts out. You need to press the two ends though as the plastic quarter interior trims are keyed into the parcel shelf. Just watch those, it took me ages to work it out.

to remove the rear seat, at the bottom of the seat, there shd be, wait let me rephrase. There WILL be 2 bolts on the bottom of the bench rear seat. Remove these.

Then at the end of the seat try to seperate the bench from the backrest. there she be a metal bar htere...just stick yr hand in and pull out that side first. and then once the back of the seat is out frm behind the backrest, just YANK will all yr might and the seat shall come out. there is a clasp. thats why.

then the back rest...on the left and right side, there shd be screw each with a metal bar there holding the backrest of the seat. unscrew it. and then push the backrest upwards to unhook it. and it shall come off. force it if u might. nothing will break

all are metal.

:)

and then the rear shelf. there shd be some bolts holding the compliance installed baby seat anchor points.. remove those as in some cars ive seen, those are also holding the parcel shelf altho thats not the case in mine.

from there, just pull the parcel shelf upwards and towards you as there are clips. similar to those holding your door panel in place.

watch out for e side pillars tho.

:P

hope this is of some help!

:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...