Jump to content
SAU Community

Recommended Posts

  • Replies 212
  • Created
  • Last Reply

Top Posters In This Topic

hahah yeh it is

hey for that price even i may give it a go

when do you plan on making payment?

will be about $140-150 aud correct?

-mark

hey Mark,

im not sure about the current exchange rate tho, but i think it wil b around that price

i wanna do it as soon as i can get 10 ppl~ but till now only 3 ppls~ lol

Fox

add me to the list - Red colour

and yes also find out if it is suitable for the RHD cars since our battery etc. is on the opposite side of the car.

this kit looks like the wires are the EXACT sizing, so, it might be a problem if it wont reach the grounding points.

Edited by BLISTC
add me to the list - Red colour

and yes also find out if it is suitable for the RHD cars since our battery etc. is on the opposite side of the car.

this kit looks like the wires are the EXACT sizing, so, it might be a problem if it wont reach the grounding points.

Thanks Mark,

I've asked him and he said it will fit, but i will double confirm, and im also waiting for the review on our forum member who has installed this kit few days ago. Hope he can give us some info when he see this.

update:

1. FoxV35 (BLUE)

2. moomoolulu (colour?)

3. danny_tg (colour?)

4. BLISTC (RED)

I would be very interested!! Please add me in!

USD115 shipped for a custom kit is a lot cheaper than the Pivot Volt Stabilised I was initially planning to buy...

Yes ill add u in, thanks.

USD 115 is really a good price, i was thinking to get Volt Stabiliser as well, but ppl said the grounding kit is more useful, so yea. might go for a try~

Update:

1. FoxV35 (BLUE)

2. moomoolulu (BLUE)

3. danny_tg (colour?)

4. BLISTC (RED)

5. Saglapian (colour?)

6. MILLOS (BLUE)

I'm in as well guys!!!

nicenice~

ur from Carlton? the one in sydney? haha...let's go for a chat later. haha~ im goin there for dinner now

3. danny_tg (Black any? or Blue then red, but still considering.. 70% sure)

hi~ i dun think there's any black ones, there's a coke colour. but haven't seen it b4~ lol

plz put ur name down if ur 100% sure. when it reach 10 ppls n ill purchase it

Are the G35 engine bays the same as ours? Are our batteries to the left or to the right?

PS. I would like black in colour if possible, if not red. Cheers!

it will be 100% fit on our car. im very sure

and there's no black in colour. sorry~ u want me 2 put it Red for ya? thx

Are the G35 engine bays the same as ours? Are our batteries to the left or to the right?

PS. I would like black in colour if possible, if not red. Cheers!

same engine bays,, our batteries are on the right side,,

hey guys just putting my input. I have bought the kit from sxexcx's and put it onto my V35. Everything fit 100% and the only problem is the battery was on the other side. Therefore putting my idea i basically swap the connection the other way around.

sxexcx's instruction:

Wire #2 suppose to connect to the battery

Wire #8 suppose to connect to the Grounding point on the Brakes compartment.

My install:

Wire #2 connect to the grounding point on the brakes compartment

Wire #8 connect to the battery

The improvement i have is the Car definitely running much smoother and more responsive. The Auto Gear shift also crispier and noticeably quicker.

The DIY term is pretty easy install for the engine bay, except the Auto transmission point. You have to go underneath the car to install it.

I cannot provide the Dyno results as this mod is not to increase Horsepower/KW, but to improve the responsiveness and smoothness of the VQ35 and shifting time on the CVT Auto Transmission.

Also the kit should fit on the Sedan with VQ35 as well.

hope my review helps

Edited by pw350gt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...