Jump to content
SAU Community

Recommended Posts

Hey guys, i've got an R33 thats had a hit on the passenger side door, so it's being parted out. Its a '96 S2 R33 Gts-t with approx 82,000 ks, in silver (KR4). Located in sydney

Engine and Gearbox are sold

Front end (headlights, bonnet etc) sold

Apexi Catback exhaust, pickup only! - $300

Batmbl stainless split dump/front pipe, pickup only! - $200

Catco 3" hi-flow cat. To suit r32/r33, maybe 34? - $100

post-35556-1244447526_thumb.jpg post-35556-1244447504_thumb.jpg post-35556-1244447939_thumb.jpg

Engine parts:

Standard turbo, good condition. Minimal/no shaft play - $250

S2 Rb25det manual ECU - $100

S2 Rb25det engine loom - $200

S2 Rb25det coilpacks - $100

S2 AFM, has one cracked mount - $50 ono

Aircon compressor pump - $100

Power steering pump - $100

Alternator - $80

Stock exhaust manifold - $50

Turbo oil/water lines + banjos - $50

Rb25det injectors + rail + FPR - $120

Rb25 Engine Mounts - $80 pair

S2 throttle body & TPS - $50

AAC valve & gasket - $50

coilpack cover - $50

CAS - $50

o2 sensor - $40

A/c condenser - $150

Aircon thermo fan - $60

Rubber intake pipe - $25

BOV recirc piping - $25

Crossover pipe + Stock BOV - $50

Fuse box lid - $20

Washer bottle - $20

Radiator overflow bottle - $20

Charcoal canister - $30

Stock airbox & snorkel + filter - $100

Stock SMIC piping - $50

Stock sidemount intercooler - $40

Bm-44 non-ABS brake master cylinder - $80

Also have a spare S2 ABS pump - $100

post-35556-1244447957_thumb.jpg post-35556-1244447980_thumb.jpg post-35556-1244448093_thumb.jpg post-35556-1244447851_thumb.jpg post-35556-1244447992_thumb.jpg post-35556-1244449685_thumb.jpg post-35556-1244449909_thumb.jpg

Suspension & brakes etc:

Apexi WS Damper coilovers front & rear - $800

(only fronts pictured but its a full set)

post-35556-1244448355_thumb.jpg

Front calipers - $280

Front rotors - $50

Rear calipers - $160

Rear rotors - $50

post-35556-1244448376_thumb.jpg post-35556-1244448394_thumb.jpg

Front lower control arms - $70 each

Front upper control arms - $40 each

Front 5 stud hubs - $80 ea

Rear 5 stud hubs - $150/pair

Rear strut brace - $100

Rear GTR swaybar, 27mm - $100 pickup only!

post-35556-1244449489_thumb.jpg post-35556-1244449475_thumb.jpg

Rear lower control arms - $50 each

Handbrake assembly & cables - $150 pair

Manaual (4.11) diff - $200

Driveshafts - $50 pair

Interior:

GTR Instrument cluster (vspec) ~82,000ks, great condition - $250 ono

post-35556-1244448442_thumb.jpg

Floormats - full set, drivers side front mat has slight damage - $80

post-35556-1244448472_thumb.jpg

S2 Steering wheel with airbag - $250

post-35556-1244448516_thumb.jpg

S2 Gear stick surround - $50

S2 Ashtray - $20

S2 dash pad (with passenger airbag) - $300 pickup only!

Drivers side window switch - $80

Boot interior + carpet - $80 pickup only!

Climate control - $50

post-35556-1244449145_thumb.jpg post-35556-1244448540_thumb.jpg post-35556-1244448608_thumb.jpg post-35556-1244449113_thumb.jpg post-35556-1244449129_thumb.jpg post-35556-1244449162_thumb.jpg

Glovebox - $40

Passenger door motor - $50

Centre console - $50

Drivers seat, has some wear on the side where you get in - $50 pickup only!

Seatbelts - $80 (will seperate)

Ignition barrel & locks + key - $100

PM me or reply here if youre keen on anything!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/273778-wrecking-s2-r33-skyline-gts-t/
Share on other sites

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

you have a pm.

Pm replied

pm sent

Pm replied

u dont have a starter motor by any chance do ya

Hiya, yep i do. Pm sent

Gots sideskirts!?

yep still have them, passenger side will need a respray though. pm me if interested

whats the best price you can give me for the steering wheel? between 100 and 150 is a good price.

I have a spare series 1 wheel you can have for $120. pm me if interested

Hey Mate,

Do you have the surround for the steering wheel column...as in the the plastic cover that goes between the cluster and the steering wheel?

If so, how much? also interested in the front/dump pipe....please Pm me your email of mob number

Thanks

David

i wil take the injectors, rail and reg.

pm sent :happy:

PM sent :(

prob gone but front bumper???

Yeah sorry mate it's gone

Hey Mate,

Do you have the surround for the steering wheel column...as in the the plastic cover that goes between the cluster and the steering wheel?

If so, how much? also interested in the front/dump pipe....please Pm me your email of mob number

Thanks

David

Sorry mate the column surround is gone, and the dump/front pipe is sold pending payment

have u still got exhaust??

pm me

yep, PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...