Jump to content
SAU Community

Recommended Posts

Hi y'all

My Stagea developed a auto trans problem today during my lunch break.

When I start up the car (or turn ignition on) the A/T light flashes 16 times. I'm now driving the car stuck in 3rd gear all the time (limp mode?). Going tiptronic and changing manually does nothing. Anyone able to identify what is wrong ... not guess what is wrong?

I had MV Automatics in Blackwood service the box and put in a shift kit some 10,000kms ago and the whole car is only 61,000kms old. Never had any problems ... been flawless.

A loose wire perhaps? I'll give MV Auto a call when I have a moment. But any help in the meantime would be great. Especially from those who had the problem before and found a solution that worked.

Link to comment
https://www.sau.com.au/forums/topic/273910-uh-oh-stag-trans-problem/
Share on other sites

Hi Roo,

Would same something rude like pull the mesh and see if it goes away but jokes aside Im 99% sure this is what adams car did when one of his G box solenoids shat itself on his old s2 and went into limp mode.

Sit tight for 5 and ill have a hunt and try and contact him aswell.

Any idea of the cost for Adam to fix?

I'd like not to believe its the solenoids. Everything I read, the box plays up a bit now and again before the solenoids fail. But my box has never played up. This happened out of the blue ... no warning. Is why I'm thinking, maybe I have a trans leak and fluid is low (one can only hope). Or a loose connector/wire.

Roo,

Run the Auto Trans diagnostic found here :

http://www.skylinesaustralia.com/forums/post-a140164-

http://www.skylinesaustralia.com/forums/post-a140165-

http://www.skylinesaustralia.com/forums/post-a140166-

Im guessing its a shift solinoid thats shagged itself.

This could be some useful reading.

Adams had no signs of it playing up then it blew the shift solinoid B out of the blue. Car would only drive in 2 and 3.

He was given a price to fix it and service as pan has to be pulled ect and the option of a shift kit. He went down the shift kit path and the fix including shift kit was around 500/600.

Mike at MV will have it sussed very quickly as he told adam the solinoids that are shagged are very easy to spot.

Any idea of the cost for Adam to fix?

I'd like not to believe its the solenoids. Everything I read, the box plays up a bit now and again before the solenoids fail. But my box has never played up. This happened out of the blue ... no warning. Is why I'm thinking, maybe I have a trans leak and fluid is low (one can only hope). Or a loose connector/wire.

fluid low ? shift kit installed ? = a shit load of heat going through the box.

stress from the shift kit, as well as low liquid. top it up see how it goes.

same thing happened to me, solenoids were getting to hot and were just letting you know there is a cooling problem in the box.

Get the leak fixed asap, might just be a gasket (service is $130)

i was quoted $560 for new Solenoids, but also got quoted $1800 for Stage 2 rebuild including aftermarket solenoids..... guess which one i chose :(

good luck man

P.S if MV only opened it up 10,000 ago, i'd be asking them to check out the leak. maybe gasket wasn't on right ? or didn't seal good

doesn't really sound like what you've described though

No. I agree. I have 3rd only (not even 2nd) ... gearbox is young and I had a service/shift kit done last year.

fluid low ? shift kit installed ? = a shit load of heat going through the box.

street from the shift kit, as well as low liquid. top it up see how it goes.

same thing happened to me, solenoids were getting to hot and were just letting you know there is a cooling problem in the box.

Get the leak fixed asap, might just be a gasket (service is $130)

i was quoted $560 for new Solenoids, but also got quoted $1800 for Stage 2 rebuild including aftermarket solenoids..... guess which one i chose :(

good luck man

P.S if MV only opened it up 10,000 ago, i'd be asking them to check out the leak. maybe gasket wasn't on right ? or didn't seal good

I'll limp the car home tonight (only 20 min drive) and check the fluid level out. I really think thats what it is.

If not, then its off to MVs for a diagnosis.

Get the leak fixed asap, might just be a gasket (service is $130)

Far out 130 for a service is alot cheaper than any prices I've been quoted!

P.S if MV only opened it up 10,000 ago, i'd be asking them to check out the leak. maybe gasket wasn't on right ? or didn't seal good

Adam said when I was on the phone to him they dont touch the solenoids on the Shiftkit service.

Roo if I were you I would check the fluid before you drive home. What time do you finish mate? Im working at Mt Barker and prob have a L or 2 of transmaxZ sitting at home in the shed in burnside if your really stuck....

Just got off the phone to MV Auto (finally got thru) and they couldn't tell me much over the phone ... not even a quote on the replacement solenoids. They want me to get the Stagea to them, but I'm flat out this week. I know more on what I'm going to do, when I get home.

Glad this happened now, not when I was in Kadina over the weekend.

Just spoke to adam again now that he was free (he was with the thread doctor before)....

He says run the Diagnostic I put up. It will tell you whats going on. If the fluid is low and its at to higher temp it will tell you that aswell.

Adam said he ran the diagnostic found out it was shift solinoid b from diagnostic. Called mike; told him what he got from diagnostic and sure enough when they pulled it apart nit was shift solinoid B.

servo might have trans fluid for a top up....

other wise, see TJ's post for my thoughts.

Sounds like the tiptronic boxes are piss weak, if you arent planning on going manual, maybe put the box from your S1 if you are willing to part out the car, and try and set up the tiptronic on it.

Sounds like the tiptronic boxes are piss weak, if you arent planning on going manual, maybe put the box from your S1 if you are willing to part out the car, and try and set up the tiptronic on it.

in stock form i think so, but a full built s2 gearbox is good for a shitload of power, and abuse :bunny:

mine is only Stage 2 with a 500hp rating.

servo might have trans fluid for a top up....

Sounds like the tiptronic boxes are piss weak, if you arent planning on going manual, maybe put the box from your S1 if you are willing to part out the car, and try and set up the tiptronic on it.

Yeah they do carry atelast one brand on dex III ATF.

wouldnt bother with the transmision swap with the s1 just speed up the manny conversion :bunny:

roo, the diagnostic sounds a bit random but once u get it, it will tell u exactly what the go is. my car spent like 2 weeks of the rd coz all these other places couldnt tell what the go it.

mine did the same thing. im pretty sure i had 2nd and 3rd i may have remembered wrong tho...

all i did was drop a little blow off parked... n that was it. what kinda driving was going on b4 it went?

if i were u id run the diagnostic 1st so u can tell him it said it was....X... this way he knows u no ur shit and not gna pay him to do it. they just re wire the solinoide and off u go. i was very happy with MV's. :)

was gonna say, it's a sign ruby :P

Yeah ... shopping for a gtr box now :P

all i did was drop a little blow off parked... n that was it. what kinda driving was going on b4 it went?

if i were u id run the diagnostic 1st so u can tell him it said it was....X... this way he knows u no ur shit and not gna pay him to do it. they just re wire the solinoide and off u go. i was very happy with MV's. :D

I've driven it hard-ish sometimes, but I'm still on 7psi boost until I can tune it (its a time thing, more than a money issue), so its not copping abuse. Leading up to the failure, I was cruising to work in peak traffic. The car is home now for the rest of the week.

Silver stagea is going to a new owner tonight (so no chance of nicking the box) and I'm picking up a new toy too. :)

A quickie:

I'm carrying out my manual conversion earlier than planned, so haven't quite done my homework.

Does a GTR manual box or GTS4 box bolt straight into the Stagea? No mods to tailshaft or mounts?

I'm aware of the other things required, like: drill out plate for shift stick, change over pedal box, need clutch kit, change over center console, change over handbrake etc. But are the boxes the same length and all?

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...