Jump to content
SAU Community

Recommended Posts

Oil pressure guage in my 32.... reads 0 to 4 to 8? kpa i think . well mine will only goes to just under 4 but never goes over 4 and after awhile nearly drops to zero when its warm and also when its cold also changes with the car being up or down a hill. I changed the oil 3 days ago with motul turbolight and replaced oil filter and have checked level several times. I noticed this might be an issue as I dont want to kill the engine from lack of pressure :P

what pressure should it be running at?

Link to comment
https://www.sau.com.au/forums/topic/274078-r32-rb20det-oil-pressure-problem/
Share on other sites

I would suggest using contact cleaner to clean the oil pressure switch (near the oil filter), as a dirty sender can send wrong data. If it's still reads the same I would try an aftermarket pressure gauge.

post-51527-1244608777_thumb.jpg

I kind of have the same problem, my o/p will drop below 4 maybe 3/4 of the way from 0-4, but i also have an aftermarket gauge to fallback on, best bet is to get an aftermarket and act what "Moodles2" said.

I read the owners manual last night and at idle pressure should be 1 kpa, 2kpa at 3000rpm and 4kpa at 6000rpm.

on the highway at 100kph my engine sits around 2900rpm and the oil pressure sometimes sits on 3.8kpa and other times sits just above zero lol I will clean the oil sender but really starting to think of getting aftermarket guage, what are some good brands

Any of the jap gauges, the sandwich plate to connect the aftermarket gauge is as important as the gauge itself, the cheap chinese ones (cooling-pro) ect. aren't exactly bolton and known to leak.

Started my car this morning and oil pressure went straight to 4kpa! thats on idle so is that a bad thing? drove to work and it kinda went up a tiny bit but pretty much stayed on 4.

any one else have this problem?

The r32 oil pressure plays up in every r32. I wouldnt bother analysing it as none of them work correctly.

Under the oil pressure gauge is a light, you only need to worry when that light turns on. As that light tells you your pressure is gonerz.

Mine always sits on 0 but then jumps up etc.

Best is to get an aftermarket gauge and then monitor the oil pressure to see if you really have a problem.

Else, you could go to any mechanic and ask to do a oil pressure test and they can let you know if there really is a problem.

The r32 oil pressure plays up in every r32. I wouldnt bother analysing it as none of them work correctly.

Under the oil pressure gauge is a light, you only need to worry when that light turns on. As that light tells you your pressure is gonerz.

Mine always sits on 0 but then jumps up etc.

Best is to get an aftermarket gauge and then monitor the oil pressure to see if you really have a problem.

Else, you could go to any mechanic and ask to do a oil pressure test and they can let you know if there really is a problem.

remember oil pressure is like blood pressure take it serious.

just to add to what has already bin said

there is a bolt that controls the pressure at the lower end of the oil pump (when the sump is removed) it is spring t

ensioned but if it slackens the oil pressure will also drop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...