Jump to content
SAU Community

Recommended Posts

How much for a 92 or above r32 gts or gtst under 100 000km's in good condition??

Ive seen prices vary from 8k for a 120 000 k 92 gts in NZ classifieds, then ive seen almost identical cars selling for 20grand

After how many kms is the engine likely to screw up??? I dont know anything about engiens and i dont want to buy a skyline which needs replacing in 6 months, is there a way to check if its in good condition?? If the previous owners thrashed it i dobut hes gonna tell me

Link to comment
https://www.sau.com.au/forums/topic/27411-r32-costs-they-vary-alot/
Share on other sites

As there are so many with such a diverse range of mods then its hard to give a definite answer. Myself i would be looking at a car that has already had an Australian owner, and around 15k.

They come cheaper and dearer, and only because someone is asking a certain price dosent mean its condition is reflected in the pricing.

Also i wouldnt be too worried when looking at kms, go on the condition of the car, using kms as an indicator. Noone wants my 92 R32 because it has 159,000kms, but thats fine, i know its a better car then many apparent 80,000km cars. They handle kms well, just as they handle hard driving well a long as the servicing has been looked after.

I recently bought a R32 GTSt in Melbourne and found good cars few and far between. Saw a few good ones, but many more dodgy cars.

Eg. cars with no compliance plates but somehow registered, dealers not wanting me to get the car tested then when they finally agreed found the car had been a major accident -10L dint in fuel tank, missing aircon compressor and fan, changed instrument panel.

Expect to spend at least a month looking then about $14-17k with roadworthy. Probably not worth buying a car without roadworthy if ur not really into engines, it could cost a lot more than uthink to get it on the road.

Finally, depending on ur age, make sure u have at least $2k extra for insurance.

Im only experienced with local prices. I paid 16k for my car by personally importing it myself. Back then you couldnt get a 32 under 21 thousand in Perth and they were rare as rocking horse shit.

Now you can personally import a 15 year old car for 10k-ish, but to be honest ive only seen one or two in decent nick. The rest have been really rough.

Hard to say what theyre worth, some owners might be looking at the "15 year" cars and dropping the value based on that. Others might not even know you can pick one up so cheap so they keep their price high.

Very difficult to judge.

As for insurance, not sure what its like in NZ with its copious amounts of imports, but I pay 700 bucks a year.

Red17

Always buy a car with a RWC, even if it's not roadworthy you can try screwing the mechanic that signed it buy getting them to repair it to save their testing license. I've been stung before by bargaining cars down without RWC, yet having to spend $2k getting a RWC for it myself. It's probably even better to get a RACV check, and better yet, get a mechanic to check the mechanical condition outside roadworthyness, (compression etc) to get a better idea of the engine itself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Assuming the current ECU is stock, it might be worth getting hold of a nissan data scan cable. It could be as simple as voltage at the ECU
    • You need to test for spark when it matters - ie cranking. Kill the fuel supply, pull a plug and earth it, set up a camera and go crank. The spark needs to be consistent, every other turn of the engine. Not some sputtering of occasional spark. The reason I say this is because spinning the CAS in the air is not the same as spinning it installed, and if there is a bearing problem in it, the disk might work differently in the air than in the engine. You won't want to try to set the timing unless you know the spark is happening right.  Also, reconsider running the R35 coils against the stock ECU. They like a different amount of dwell cf the originals. It's not massive, you can actually run them, but it is better if you can adjust the dwell (which you can with Nistune in the stocker, or with an aftermarket ECU). Besides any of that - when you had the multimeter out, have you got power where it needs to be, earth where it needs to be (and when, in the case of igniter triggers), etc?
    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
×
×
  • Create New...