Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Yep agree with INVERTD. You may be able to chase it up via TPA...section 53 i think..

- '(aa) falsely represent that services are of a particular standard, quality, value or grade'

And what does Nissan say about the "Quality of the Leather" on the R35?

Even a $66K WRX STi is advertised as having "high quality Alcantara leather"

I think I have the solution, find 200-300k cash (what you might have saved on a Porsche turbo or Ferrari) and either spend it on getting the car where you want it standards wise or buy something nice for your misses, you might get lucky and relax a little!

Just kiddin buddy. I too have noticed the difference in fit and finish to my 540i, the car more than makes up for it in bang for your buck though. You are paying for R and D, techno wizardry and not paying much for it compared to it's competitors. Go track the car so you and it can bond a little

You are probably right. I have an E55 AMG with beautiful Nappa leather and gorgeous birds' eye maple interior and now want to repeat the experience. Silly me.

I am very happy with 95% of the GT-R interior as exactly what I expected, if only they hadn't inserted that freaking off cut where I can see it!

You are not wrong with the 997 Turbo either. I actually walked away from buying one at the last minute to get this monster! That 250K saved is very nice, thank you Nissan.

I will be tracking this baby just as soon as I get my first service done next week and the Ozicozi clear film goes on the front. Those flying pebbles at Eastern Creek can really sand-blast the paint.

We will bond for sure. Thanks, mate.

Edited by GT-Ricer
  • 2 weeks later...

that does look pretty average. the 3 jdm cars I had were no where near that bad. 1 07 model and 2 early 08 models. maybe they are less worried about small export markets than their own domestic customers... the adm cars I've looked closely at were not as bad as yours either. I'm sure even if their average is not exactly ferrari grade they can still do better than what you have and should definitely provide you with 2 new front seat covers at their expense.

it's also a bit odd how in their email they say that being a natural product it has blemishes, defects etc. then in the next paragraph they state that is has no defects...which is it?

that does look pretty average. the 3 jdm cars I had were no where near that bad. 1 07 model and 2 early 08 models. maybe they are less worried about small export markets than their own domestic customers... the adm cars I've looked closely at were not as bad as yours either. I'm sure even if their average is not exactly ferrari grade they can still do better than what you have and should definitely provide you with 2 new front seat covers at their expense.

it's also a bit odd how in their email they say that being a natural product it has blemishes, defects etc. then in the next paragraph they state that is has no defects...which is it?

Some people think that saving face means not admitting they've made a mistake. On the contrary, dealing quickly with this festering sore will give them a lot more credibility than pretending the problem

does not exist. I am not going to just fade away, am I?

As to natural products, there are many natural products out there but few of them are fit to be used in high-end sports cars interiors.The statement is patronising to say the least, as if I hadn't had leather seats, all of them of better quality, in every car I've owned in the past 25 years.

I would be pissed about this. As has been said, there are Fords and Holdens with better quality leather. Judging by your photos, this is what I imagine pleather must look like after 10 years of wear. Please continue fighting this!

I do feel, however, that the expectation is there. I'm surprised we haven't heard more complaints about the quality of materials etc. used in the R35. Afterall, this car was meant to be the "affordable" supercar and you can be sure that every cost cut possible (bar the engineering side of things) would have been made in its production to make the car viable. Regardless, any car costing 170k should not have seats with a material that would make you consider vinyl as a better alternative :P

P.S. In the patronising manner it is written, it wouldn't surprise me if the customer service reply you got came straight from a template/mail-merge with your name inserted in the fields. Standard, typical, hope-you-go-away-after-reading-this response.

Edited by Birds
What I don't get is, the difference in quality between the 2 panels where you have your thumb pressed down.. They should be identical..

This is obvious to everybody except Nissan Australia and Nissan Japan... it is a natural product, you know...! :)

And LOL @ natural product. So I guess they just dug the rest of the R35 out of the ground too. Is "natural product" the new word for not covered by warranty? Perhaps they were aiming for that "imperfection is perfection" philosophy?

I can tell you for certain none of the R35s i imported had leather looking anything like that. they were all fine.

Yes, but they were all JDM, not the stripped down ADR versions. Maybe the Japanese consumers are more demanding and not as gaga-eyed over the GT-R as Nissan presumed the Australian buyers would be after all these years in the wilderness since the last GT-R disappeared from our market?

Well as i said from day 1, we were gonna get detuned versions of the GTR and the warranty and service from Nissan wont be worth spit but i got shot down by a few guys for saying it.Looks like i was 100% correct

GT-Ricer :Mate i would seek immediate advice from a solicitor and dont bother talking direct to Nissan, you have to start acting like a flamin mongrel about this for anything to happen, Good luck, i hope you get it repaired at Nissan AUS expense.

edit:(LOL i didnt use flamin mongrel i used the C word, thanks SAU swear detector)

Why does the R35 sound so much like a used car?

:P

New from Nissan in 2010...the "Previously Owned" (dodgy-dealership, worth-less-than-the-paper-it's-written-on-warranty included).

The internet is a wonderful place. A couple of complaints on an aussie forum and suddenly all the thousands of owners have been spoken for worldwide and the car is deemed worthless.

Don't worry Birds, the car is awesome.

Finding a defect on my 175k Nissan doesn't hurt as bad as a 450k Lambo owner breaking a cheap plastic dash switch for the first time.

lots of theories here. Just a bad batch of leather. At the end of the day to retrim outer edge of the seat in leather will cost at MOST $2,000?. When I was selling cars you could retrim 4 seats in some very nice Howe leather for that kind of money. $2K in leather can save a WHOLE LOT of headache for all involved. You wonder why, on a flagship car Nissan couldn't just bite the bullet. A local motor trimmer can do a great job with great leather at what amounts to as a drop in the ocean for a big company.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...