Jump to content
SAU Community

Nissan Skyline R32 Gtr 500+hp

r32gtrskyline
 Share

Recommended Posts

  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...
PWND Grand Master

PWND

Posted
Posted
The motor was obviously built in Japan as you can see from the setup.. No disrespect to the owner but he would not have a clue on the engine internals as it hasnt been opened.

my skyline was obviously built in japan too. as was every other one. i am not sure why you are answering whether the owner knows what the internals are. if he doesn't know, then the engine should not be advertised as a built engine. if he does, could he please share the information.

Link to comment
Share on other sites
  • 1 month later...
  • 4 weeks later...
NoFX_Hardcore Proficient

NoFX_Hardcore

Posted
Posted

Obviously doesn't know and is trying to hide it since he has been asked so many times.

To the owner: harden the f**k up and just list details of the engine "build". What pistons/rods etc were used and who "built" it? You are never going to sell it without these key details.

Link to comment
Share on other sites
r32gtrskyline Rookie

r32gtrskyline

Posted
  • Author
Posted
Obviously doesn't know and is trying to hide it since he has been asked so many times.

To the owner: harden the f**k up and just list details of the engine "build". What pistons/rods etc were used and who "built" it? You are never going to sell it without these key details.

Why do you bother to reply to something when you arent interested. You are just being a f**k wit. As I have said to others who pm me about the car I am not the owner and to contact the owner if they wanted to know more about the car.

Link to comment
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Why do you bother to reply to something when you arent interested. You are just being a f**k wit. As I have said to others who pm me about the car I am not the owner and to contact the owner if they wanted to know more about the car.

Well tell the owner to register.

Thread edited and locked.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • r32-25t
      Bolt dress up kit

      By r32-25t · Posted

      They sell them in Malaysia for about $4
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...