Jump to content
SAU Community

Rb26 Oil Mods

duff

By duff,
in Engines & Forced Induction

 Share

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Why wouldn't you?

You need to add more to accommodate for the oil that runs around the oil cooler otherwise if you just overfill one litre, so minus one litre for the oil cooler, you are totally back to square one again with regards to how much oil is in the sump.

** use of '1 litre' is only an example amount.

GTRsean Grand Master

GTRsean

Posted
Posted
Wouldn't it be overfull with 2 extra litres, even with an oil cooler? as in the oil would cavitate?

You mean that the crank would 'pick up' the oil, and loose hp?

Once you install an oil cooler, first time you fill up with oil it would take more than 5 litres.

Then if you do an oil change there is still oil trapped in the oil cooler and lines so you would add as much as you usually would to suit, as if there was no cooler.(unless you drain the oil cooler as well...)

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Wouldn't it be overfull with 2 extra litres, even with an oil cooler? as in the oil would cavitate?

1 litre - example amount remember. Put 500ml there for all it means

Its commonly accepted that you overfill 1 litre in the stock format.... so add an oil cooler - you'll need more

Im pretty sure ash means 2 litres more than if it didnt have an oil cooler, not fill it to th efull mark and add 2 litres.

:D

NickR33 Grand Master

NickR33

Posted
Posted
I was one of the GTRs that did the bigend bearing and i have all the mods BAR the oil return from the back of the head.

Mods done

: Larger sump with tomei sump baffles

: Tomei oil restrictors with returns enlarged

: I over filled on the day

I would say Revs and the frist sweeping turn did me in i was holding it in 4th down the straight maybe 8500rpm or so as my 4wd was playing up and getting power done was more wheel spin the grip lol.

But it still gave up the ghost so i say fit it when it breaks.

damn, that sucks :)

bozodos: I have lunched the bearings in a 25 at the track... but it had zero oil control mods at the time, no oil cooler and I was on my 7th hot lap in a row :P... I don't think they are as bad as 26's for oil control but you can still kill them

Mr GTR-32 Community Regular

Mr GTR-32

Posted
Posted

Sorry of topic a little someone mentioned there RB26 takes 5.1 litres of oil, i dont understand as my R32 gtr takes 6.3litres give or take to fill no oil cooler stock sump, and i change the oil always so im sure of this 100%.

What is going on why are there so many different opinions on sump capacity for the 26 please someone. :P

MrStabby Grand Master

MrStabby

Posted
Posted
Sorry of topic a little someone mentioned there RB26 takes 5.1 litres of oil, i dont understand as my R32 gtr takes 6.3litres give or take to fill no oil cooler stock sump, and i change the oil always so im sure of this 100%.

What is going on why are there so many different opinions on sump capacity for the 26 please someone. :P

The service manual states: 4.2 liters for oil only change, or 4.6 liters with oil filter. It also states that the low level mark on the dipstick is 3.5l and the high mark is 4.5 l. Oil cooler wont make any difference to the fill unless you drain it, or the valve is broken and it just drains under gravity.

AFAIK everyone with the stock sump uses pretty much 5 liters. Are you SURE you have a stock sump?

Mr GTR-32 Community Regular

Mr GTR-32

Posted
Posted

Yeah Mr Kotter i have stock sump well i think that i do it looks the same as all the others i will check in the next few days as i am due for an oil change.

Its weird i know but from the day i bought the car and did the first oil change i noticed that it took more than what should have. The design looks the same and i have done enough oil changes in my time on trucks and various makes and models to know how to look at a dipstick.

Well i will definately look into this as its a mystery. :P

Mr GTR-32 Community Regular

Mr GTR-32

Posted
Posted

yeah i guess that makes sense but if i where running 2litres more in my sump for 2 years would something have happened by now with so much extra oil. I mean i hear of guys running 1 litre more for track but gosh ive would have been using 2 litres more all this time and the car has never missed a beat ever. Point taken and will check that also cheers for the input.

Beer Baron Grand Master

Beer Baron

Posted
Posted
The service manual states: 4.2 liters for oil only change, or 4.6 liters with oil filter. It also states that the low level mark on the dipstick is 3.5l and the high mark is 4.5 l. Oil cooler wont make any difference to the fill unless you drain it, or the valve is broken and it just drains under gravity.

AFAIK everyone with the stock sump uses pretty much 5 liters. Are you SURE you have a stock sump?

thank you. if you have an oil cooler, and add 2 litres to your oil change. it will be 2 litres over full. which is bad. if you want 1 litre over, just add 1 litre. no matter how many oil coolers you have.

  • 1 year later...
Willis Proficient

Willis

Posted
Posted

What about for normal driving, and occasional hillclimb's / mountain runs..

Do you guy's all overfill your cars with oil? I've always been under the impression that "Full" oil meant it should be o.k

I want to avoid a rebuild as well.. but i am a sensible driver, and i dont thrash my car. Only rev it to like 5-6krpm up the mountain..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
    • GTSBoy
      R34 manual conversion speed signal wire finding, need help

      By GTSBoy · Posted

      Yes. Autos typically work from the speed sensor on the pinion shaft of the diff. I also think that even if you have a proper speed sensor for the bog manual in the manual box, that the signal it outputs is not compatible with the auto dash anyway. You should consult that manual (the book, not the gearbox).
    • GTSBoy
      First time Skyline owner

      By GTSBoy · Posted

      And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
×
×
  • Create New...