Jump to content
SAU Community

Recommended Posts

The R32 N1's all have a different chassis designation to standard GTR's

The main way to spot it is that the second last letter is a Z.

Fro example mine is (on the Nissan build plate, not Aus compliance sticker)

KBNR32RXFSZN

The last letter, in my case N was used on all N1's pre 93, however the N1's after 93 which were based on V-Spec 32's all have a different last letter. (actually i'm checking this now could be one of the other letters that were different on the V-Specs)

*edit*

here we go

KBNR32RXFS-ZN for the car made 9108-9302

KBNR32RBFS-ZN for the post 9302

Cheers

Link to comment
https://www.sau.com.au/forums/topic/275396-real-n1/#findComment-4666073
Share on other sites

Id guess your talking about this one;

http://www.my105.com.au/classified.asp?id=12132

If so, and you want more info, send a pm to "Marlin". Shame i dont have $65k spare, id be all over that like a rash.

There's not many N1's floating around, here's another though;

http://www.my105.com.au/classified.asp?id=6723

Link to comment
https://www.sau.com.au/forums/topic/275396-real-n1/#findComment-4666284
Share on other sites

PS - if looking at that ex Whites R34 for any motorsport then budget an extra $10K to replace the White Hot Motorsports brake set-up. Everyone who has owned that car since has complained about massive pad knock-off and it can only be as a result of those dodgy home made brakes. LOL

I don't know why they keep doing it. The had to give up the chase at Targa this year with the Lambo as their brakes gave out again.

Link to comment
https://www.sau.com.au/forums/topic/275396-real-n1/#findComment-4666534
Share on other sites

PS - if looking at that ex Whites R34 for any motorsport then budget an extra $10K to replace the White Hot Motorsports brake set-up. Everyone who has owned that car since has complained about massive pad knock-off and it can only be as a result of those dodgy home made brakes. LOL

I don't know why they keep doing it. The had to give up the chase at Targa this year with the Lambo as their brakes gave out again.

Who needs brakes? Remember, I ain't that quick.

Link to comment
https://www.sau.com.au/forums/topic/275396-real-n1/#findComment-4667247
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...