Jump to content
SAU Community

Recommended Posts

Hey guys i got some problem with my car its drinking heaps of fuel i normally get around 350-450ish a tank depends on driving style but ever since the cold has came my car drinks a lot of fuel e.g i only get around 200k's a tank and my car hesitates to come on boost sometimes? like feels like somethings holding it back and also it misses around 5k ish only sometimes? i havne't done any modifications to the car

Mods:

PFC

PFC BCK

Turboback zorst

FMIC

Z32 AFM

Nismo 740cc injectors

walbro fuel pump

i havne't done any other mods since it was tuned wiht those mods....

Cheers

Chi

Link to comment
https://www.sau.com.au/forums/topic/275493-something-wrong-with-car/
Share on other sites

how long does it take for the car to come up to temp? it may be that your thermostat is on it's way out (or already gone) and causing it to run colder start enrichment for longer, or all the time. this will cause poor fuel economy, and the extra fuel can foul up the spark plugs.

also what do you class as a tank? how many litres? saying "a tank" is a useless measure as different gauges will read differently so you might be calling 30L a tank or 50L a tank. put your economy into L/100kms

It can miss on idle if the coilpacks are worn out... Higher RPM will often see coilpacks missfire in cars that idle normally simply because they are working allot harder as the RPM increases.

I'v had a coilpack gradually get worse and worse untill it was a WRX from the first turn of the key.

hmmm ever since i changed the radiator cap to an ARC one i've got a Koyo Radiator the max temperature it goes upto is 60-65 degrees.....normally warms up to 75-80 degrees with the stock radiator cap.....full tank is 50L or so :P

Cheers

Chi

that is very weird that the cap is altering the temp. never heard of that before. i know it can alter the boiling point, but never heard of it altering the running temp.

but i would still look at the thermostat. no matter what the radiator, etc, your temp will ultimately be set by the thermostat as that stops any coolant leaving the block until it's opening temp. so i would guess that it isn't sealing properly. that causes lower temps and longer warm up time, and higher fuel consumption

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Perfect day for a pie, really needs a soft top in this weather though
    • Prime parking, she is a little girl...LOL
    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...