Jump to content
SAU Community

Recommended Posts

What up muh peeps!!

I picked up a series 1 last night

Before i commence the RiaZ transformation i need a bit of help

i searched last night with no luck

the front bar indicators/park lights/driving lights (not sure which)

is spinning me out

I have seen 2 types

one has a larger orange indicator section and a small clear one

and the other is the one i have with a smaller orange indicator section and larger clear one.

Is this an indicator/park light or indicator/driving light

is there supposed to be a switch?

how does it all work?

is it just so it looks pretty?

anyone who can locate a thread please put up a link if it helps answer these questions

second thing is has anyone got any spare mounts for installing a stereo? (the factory brackets used to connect to hold the deck in the console are missing)

or if anyone has some lying around that I can look at to make my own brackets that would be fantastic

oh yeah 1 more thing

clutches

do 93 r33 clutches wear so the engaging is at the floor or higher up

thanks

i am sure there are plenty of series 1 owners who know all these answers

RiaZ

i was also wondering about the front indicators... (r33 s1 aswell)

but i figured it out...all by myself... :D

haha

anyway this is what i know:

Park lights are on the outside of the headlights.

Frontbar indicators are yellow with a clear bit next to them as as far as i can tell the clear bit does **** all and is just show..

i dont have fog lights or anything in them although chuckin some lights in there for some foggy's could be the go

my 2 cents hopefully it helps...

well from what i'v seen on "most" lines is that those light in the indactors do a whole lot of nothing series 2 and series 1

but in some cases they do have a switch if you look where u turn your lights on (indactor arm) there should be the normal switch for turning lights on in some cases there is another similar switch right behind this one for turning these lights on i'll take a digi pic later and post it

i know about the stalk cos i had a series II before and those do a whole lotta something which is fine.

back to the front bar indicators very annoying... and there definately is 2 different types with like I said a larger and smaller clear section next to the indicator.

maybe its just spares that have been thrown in from another r33 that did have lights

in that case i see some missle switch action. test wires for what wattage bulbs they will support and bobs gonna be my uncle

umm paul tis true the fun has begun already

i will holla at ya for sure

anyways next and most importantly is the stereo bracket.

need tunes arrrghhhh

its been less than 24 hours since music in the car...the world is gonna end.

anyways next week i should be at kwinana seeing what abuse this car will take considering the clutch is not standard.

oh yeah someone answer the clutch question

hey riaz

heres some threads that might help u out

http://www.skylinesaustralia.com/forums/sh...ighlight=lights

and in the bottom of that thread theres another link.

what colour is your car dude? what engine mods? :D

good2c u got another 'line.

Originally posted by NO_RSPECT

back to the front bar indicators very annoying... and there definately is 2 different types with like I said a larger and smaller clear section next to the indicator.  

maybe its just spares that have been thrown in from another r33 that did have lights

Yeah, you're probably right. The bumper may have been replaced with a 2nd hand one that came with driving lights (what you have).

in that case i see some missle switch action. test wires for what wattage bulbs they will support and bobs gonna be my uncle

Don't forget the relays. Should work ok.

anyways next and most importantly is the stereo bracket.  

need tunes arrrghhhh

its been less than 24 hours since music in the car...the world is gonna end.  

Don't have the bracket but you can have my factory double din stereo if you want. Use it to make a bracket or just jam it in there.

oh yeah someone answer the clutch question

Need more info, do you think the friction point is too high or too low right now? Come around and I'll have a test drive :(.

thanks for the offer gradenko

i might be round in a fortnight i think once the kit is on

if WORKS AUTO do me a good price

also the thread BOO5T is exactly the thread i read a while back and was looking for, so glad you found it, i was getting hell annoyed

I am going to rip the bar off etc and see what goes where and what i can do to those lights. like up the relays and stick some brighter lights in, as long as the plastic can handle it

umm the stereo brackets are $11.50 from nissan (EACH)

so I might just fork and buy some cos its too much stuffing around, then i will need one of those dual diversity antenna adaptors as well.

also anyone selling any 6x9's cheap, lemme know otherwise i will have to tap into my resources.

i can't believe series 1's are like so different in the small little things

1 more thing, is anyone selling a series II wing here in Perth

oh rofl rofl

pantene paul

man that is seriously gonna stick

Umm if i dont have the factory solenoid for the boost control and there is the line going from the wastegate to the air intake.....what does this mean for boost.

fark i hate modded cars

i havent learnt all this stuff yet and now its all done to the car

anyone....boost guage for sale at all?

2" size

Hi Guys,

JB HiFi just opened up in Cannington today. They do all car and home audio in addition to CD's.

If any of you wanna come down and have a chat or get speakers/amps/subs etc for your lines tell me your from Skylines Australia and ill give you all trade prices....

Cheers

Adam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...