Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

It's called 'dosing' in the VL world, also know as 'flutters', but around here it's best described as 'compressor surge'.

It's the sound of the air bouncing off the turbine blades when the butterfly to the intake plenum is closed. Normally all this pressurised air get's released by the Blow Off Valve, but if you don't have one, it does that.

Different length, shape and designs of pipes make different noises...

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4673870
Share on other sites

It's either a HKS Super Sequential BOV or some cheap ass BOV or like what others have said compressor surge.

HKS Super Sequential BOV = Wank (Only useful on highly tuned cars that are running a lot of boost and the stock one cannot handle it any more)

Compressor Surge = Say goodbye to your turbo.

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4673960
Share on other sites

  (OO)SKYLINE(OO) said:
It's either a HKS Super Sequential BOV or some cheap ass BOV or like what others have said compressor surge.

HKS Super Sequential BOV = Wank (Only useful on highly tuned cars that are running a lot of boost and the stock one cannot handle it any more)

Compressor Surge = Say goodbye to your turbo.

Is that the HKS SSQV BoV? I've been trying to convince a mate to buy one for his evo, but all the vids I've seen of it its a sharp, high pitched noise rather than the VL flutter.

Just curious, is "dosing" unique only to the VL, or is there a specific reason VL owners choose it?

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674172
Share on other sites

  KezR33 said:
Is that the HKS SSQV BoV? I've been trying to convince a mate to buy one for his evo, but all the vids I've seen of it its a sharp, high pitched noise rather than the VL flutter.

Just curious, is "dosing" unique only to the VL, or is there a specific reason VL owners choose it?

Yeah either it's the HKS BOV or like others have said with the metal pipe.

Any turbo car can make the noise, it just depends on the BOV set up or whatever the owner does to it.

The stock BOV should not make any noise, at least no "Stu Tu Tu".

But if you put on an air pod, while still having your stock BOV, you will get a nice "Suction" noise then a "Choo" at the end (Only when on boost).

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674302
Share on other sites

  KezR33 said:
What the hell is that noise? I've heard it twice now, both times from VLs. Is it some tricked out BoV?

If you ask me I think it sound ridiculous. My girlfriend was in hysterics for about 10min as we drove beside this thing.

Thanks.

LOL! just search "VL turbo dose" on youtube,,theres thousands of videos on that stuff,,apparently they're a favourite with wog guys and their significant others

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674330
Share on other sites

my ceffy doses like an athlete on the roids, but it comes from factory with no recirculation valve, and still runs stock boost on a stock turbo. all you have to do is take out the intake resonator and bolt in a pod and I get instant flutters.

GAGF if that's bad for the turbo, it came from factory like it and has run for 180,000 kms with no damage to the turbo or engine.

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674359
Share on other sites

  DRD-00F said:
Will SOMEONE just post the damn bird pictures... that's the only reason I keep checking this thread!

http://www.skylinesaustralia.com/forums/in...howtopic=274502

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674431
Share on other sites

  (OO)SKYLINE(OO) said:
Yeah either it's the HKS BOV or like others have said with the metal pipe.

Any turbo car can make the noise, it just depends on the BOV set up or whatever the owner does to it.

The stock BOV should not make any noise, at least no "Stu Tu Tu".

But if you put on an air pod, while still having your stock BOV, you will get a nice "Suction" noise then a "Choo" at the end (Only when on boost).

that is incorrect.

the only relation a BOV has to flutter/dosing is whther its blocked or not. the type of flutter/dose depends on the width, length and material of the induction pipe. the turbocharger does play a roll aswell.

all a bov does is hold the air trapped in the piping. so it bounces around and goes back through the turbo, for the turbo wheel fins to chop up and make a stuttered noise.

a SSQV HKS BOV has nothing to do with dosing....its just like any other BOV... but produces a whistle like sound when air goes through it. if you block it off, its the same as your OEM bov and every other blocked bov. does nothing special.

the Dose you hear on VLs sound like stupid dolphins or piegons as you heard.

they run a small metal pipe, no bov, and multiple bends to magnify thehigh pictched stuttered noise.

alot of the high powered veicles in japan and here automaticlly produce this sound as a side affect for high horsepower aplications but usally produce a much deeper tone due to larger turbos.

this is because piping is usally much larger due to larger turbocharges and dont run many bends.

although the title says HKS SSQV, its incorrect.

personally i hate the high pitched doses, which have been attached to wogs and VLs. but i am madly in love with the noise similar to the 650hp R34 GTR videoed above. would prefer it over a OEM "CHOO" or whistle anyday

my 2c

:P

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674583
Share on other sites

the vl boys cut a gap in there intercooler piping to put there afm so that there is no restriction between pod and turbo.

using diffrent lengths and angles of piping gives diffrent pitch noises.

alot of the guys that i went drifting with on the track a while ago had it, sounds sick when your using your accelerator to control the slide.

Link to comment
https://www.sau.com.au/forums/topic/276031-stu-tu-tu/#findComment-4674589
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi ๐Ÿ™‹โ€โ™‚๏ธ. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? ๐Ÿ˜ƒ  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this ๐Ÿ™
    • Hi, Marek here ๐Ÿ™‹โ€โ™‚๏ธ. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
ร—
ร—
  • Create New...