Jump to content
SAU Community

Recommended Posts

What is the best way to learn drift for the novice.

Pay $500 and do a drift school for the day, use their cars to start with etc?

Attend some club days and learn from others?

The first is expensive, the latter is likely non productive or teaches bad habits.

I'm a bit isolated, country nsw is not exactly drift centre of the universe. So will likely use the first option for high impact - means I don't have to keep travelling backwards and forwards to Sydney repeatedly, but can do a couple of drift school days and then progress to the club days if I want.

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/
Share on other sites

yep, I would go to a training day. going to club drift days is ok, but if you don't pick it up fast you will easily get frustrated. also 90% of those days do not allow any passengers so you can't have someone in the car with you and you really do need that to show you what you're doing wrong. asking people for tips and hoping for the best does not always work. you'll learn more in 1 full day or proper instruction than you would at half a dozen club/open drift days I think.

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4675683
Share on other sites

the baron is right... use someone elses properly set up car, and someone who knows how to drive it... they can teach you its behaviours and driving requirements which you can then take to your car... whereas you might think you need more power... you might find out that you actually need more entry speed or some simple suspension tweaks..

i did a rally day... it was expensive, but a load of fun and something ill never forget.. the lessons learnt there have helped me with getting the most out of all my cars.

which part of country nsw are you from??

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4675710
Share on other sites

  • 3 weeks later...

Mate I would have to agree with the above and suggest the school. It's a shorter way to learn what has taken us years to work out. You certainly won't be lining up for Drift Australia after your first day, but you will have the basic skill set to take forward if you like drifting. Other benifits are that at least with the Project D drift school you get to use cars built by some of Aus best drifters, trained by the guys that built them, and you don't have to beat up on your own car. :)

You might even see me! lol

I still gotta learn to drift too :D

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4712768
Share on other sites

Id suggest school!

But... :D

If you have, or know someone who has a big empty paddock its pretty handy. That's where i've done a bit of testing, trying stuff out, although its a very different feel to tarred surface etc, its still pretty good for a bit of a practice go, not to mention shits and giggles.

:)

Edited by Anthony13
Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4712790
Share on other sites

I definitely recommend attending a School day to start out, it is well worth the price. You are being taught in our purpose built drift cars by our professional and experienced instructors.

www.projectd.com.au

Have a look at our new website it's got everything you need to know, our instructors are also on our forum pretty much every day so feel free to ask them or myself anything you need to know.

Amy

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4715299
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...