Jump to content
SAU Community

Recommended Posts

What is the best way to learn drift for the novice.

Pay $500 and do a drift school for the day, use their cars to start with etc?

Attend some club days and learn from others?

The first is expensive, the latter is likely non productive or teaches bad habits.

I'm a bit isolated, country nsw is not exactly drift centre of the universe. So will likely use the first option for high impact - means I don't have to keep travelling backwards and forwards to Sydney repeatedly, but can do a couple of drift school days and then progress to the club days if I want.

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/
Share on other sites

yep, I would go to a training day. going to club drift days is ok, but if you don't pick it up fast you will easily get frustrated. also 90% of those days do not allow any passengers so you can't have someone in the car with you and you really do need that to show you what you're doing wrong. asking people for tips and hoping for the best does not always work. you'll learn more in 1 full day or proper instruction than you would at half a dozen club/open drift days I think.

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4675683
Share on other sites

the baron is right... use someone elses properly set up car, and someone who knows how to drive it... they can teach you its behaviours and driving requirements which you can then take to your car... whereas you might think you need more power... you might find out that you actually need more entry speed or some simple suspension tweaks..

i did a rally day... it was expensive, but a load of fun and something ill never forget.. the lessons learnt there have helped me with getting the most out of all my cars.

which part of country nsw are you from??

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4675710
Share on other sites

  • 3 weeks later...

Mate I would have to agree with the above and suggest the school. It's a shorter way to learn what has taken us years to work out. You certainly won't be lining up for Drift Australia after your first day, but you will have the basic skill set to take forward if you like drifting. Other benifits are that at least with the Project D drift school you get to use cars built by some of Aus best drifters, trained by the guys that built them, and you don't have to beat up on your own car. :)

You might even see me! lol

I still gotta learn to drift too :D

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4712768
Share on other sites

Id suggest school!

But... :D

If you have, or know someone who has a big empty paddock its pretty handy. That's where i've done a bit of testing, trying stuff out, although its a very different feel to tarred surface etc, its still pretty good for a bit of a practice go, not to mention shits and giggles.

:)

Edited by Anthony13
Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4712790
Share on other sites

I definitely recommend attending a School day to start out, it is well worth the price. You are being taught in our purpose built drift cars by our professional and experienced instructors.

www.projectd.com.au

Have a look at our new website it's got everything you need to know, our instructors are also on our forum pretty much every day so feel free to ask them or myself anything you need to know.

Amy

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4715299
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
×
×
  • Create New...