Jump to content
SAU Community

Fuel Management And Injectors For M35

mym35

By mym35,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Jetwreck Grand Master

Jetwreck

Posted
Posted

I am going with the Haltech Interceptor in about a month....as for the Injectors, I am keeping them standard at the moment....hoping I don't have to change them as I am only going for about 200 - 210 killers wasps at the wheels with this motor :laugh:

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)

Standard injectors are good for supplying fuel at 1.3bar (19psi) that I know of.

Will be going with the eManage Ultimate... eventually.

Will be interesting to see what the OE injectors can handle. Would like to see 230-250awkw in time.

Definitely think that 200awkw would be possible without further mods.

Edited by iamhe77
scotty nm35 Grand Master

scotty nm35

Posted
Posted
Standard injectors are good for supplying fuel at 1.3bar (19psi) that I know of.

Will be going with the eManage Ultimate... eventually.

Will be interesting to see what the OE injectors can handle. Would like to see 230-250awkw in time.

Definitely think that 200awkw would be possible without further mods.

I was hoping you had fitted the Emanage by now, I didnt want to be the first... Seems to be the best option according to Status tuning. :laugh:

iamhe77 Grand Master

iamhe77

Posted
Posted
I was hoping you had fitted the Emanage by now, I didnt want to be the first... Seems to be the best option according to Status tuning. :laugh:

Would have liked to, but more important stuff keeps popping up.

Will be next though... but next will be in a few months I would think.

QWK32 Veteran

QWK32

Posted
Posted
I am going with the Haltech Interceptor in about a month....as for the Injectors, I am keeping them standard at the moment....hoping I don't have to change them as I am only going for about 200 - 210 killers wasps at the wheels with this motor :laugh:

haltech interceptor is a good option, they interrupt the signals before the ecu rather than after the ecu like the emanage does. Interceptor is like a top of the line more tunable safc/sitc setup. Do they have a plug n play option for the M35? I know they do for the 350z and I think also for the V35.

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
Do they have a plug n play option for the M35?

Nope.

Need a Universal Harness

Ideally I will have the eManage plugged into the Universal harness which is wired into a "field" harness which plugs into the ECU.

This way, I can unplug the eManage from the ECU without leaving a mess and plug the ECU loom back in, no problem. :laugh:

Edited by iamhe77
QWK32 Veteran

QWK32

Posted
Posted
the emanage intercepts it before AND after the ECU, it depends on where the signal is coming or going.

i rekon an M35 plug and play would be hard to come by!

its only before on the AFM and after on the injectors for fuel adjustment, ignition is only done after. anyway, is the ViPec an option for the M35? it has been successfully installed on a S2 C34 which has the auto ecu bundled in with the engine ecu, it is a quite expensive option though.

iamhe77 Grand Master

iamhe77

Posted
Posted
I'll be going with an SAS ECU Remap, hopefully aiming for around 250 - 300 awkw.

Then again maybe I should be aiming for fuel efficiency :P

Don't think you will see 300awkw with just an exhaust, highflow and ECU remap.

I would be more than happy for SAS to prove me wrong though.

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted
I think Steve has a typo....don't you mean approx 300 killer wasps at the crank?

LOL maybe, I just wanted to add 2 cents worth and get some change :(

It's just going to go fast ok :) and probably use the same amount of fuel it uses now :|

iamhe77 Grand Master

iamhe77

Posted
Posted
LOL maybe, I just wanted to add 2 cents worth and get some change :)

It's just going to go fast ok :) and probably use the same amount of fuel it uses now :|

Should use less bud.

I know a certain S2 with mild mods that has an eManage Ultimate installed.

Power was bumped up ~50awkw while giving the owner an extra 100kms or so per tank.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...