Jump to content
SAU Community

Recommended Posts

Hi everyone,

My parents had recently bought a stagea m35 ar-x. I was originally after an Apexi pod filter but i was unable to find one for that particular model. Would anyone know if they are they same fittings as the older model stageas or r34? Or any highly rated pod filter that anyone would recommend.

any help would be appreciated.

cheers!

Link to comment
https://www.sau.com.au/forums/topic/277080-which-pod-goes-into-a-m35/
Share on other sites

i believe they are different to C34 intakes.

the V35 kits apparently dont fit either, but considering they use the same airbox setup, i dont see how they would. but its a risk.

there ARE M35 kits, but if youre buying from japan, be aware you MUST have one for an NM35 VQ25DET. or just put a panel in the stock airbox like most of us have anyway

Hi everyone,

My parents had recently bought a stagea m35 ar-x. I was originally after an Apexi pod filter but i was unable to find one for that particular model. Would anyone know if they are they same fittings as the older model stageas or r34? Or any highly rated pod filter that anyone would recommend.

any help would be appreciated.

cheers!

Yes, the Blitz LM and SUS Power pods both come in a kit for the NM35.

Don't think that they offer the greatest filtration though.

Try to find a place that stocks 3A Racing pods, much better than Apexi and about a third of the price.

If you find a store that stocks them, get them to fit it :laugh:

the V35 kits apparently dont fit either, but considering they use the same airbox setup, i dont see how they would. but its a risk.

Same airbox, different intake piping (obv).

but remember the pod sits where the airbox would (seeing as its removed) so i dunno why a V35/PM35 one wont fit if they run the same airbox.

anyway, nothing is better than an apexi pod :laugh:

For the same reason that lovely Mishimoto radiator did not fit in my M35, bit fits straight into a G35/V35...

"anyway, nothing is better than an apexi pod :laugh:"

As usual, I enjoy your sarcasm, Iain!

thanks for that. ill see how i go about sourcing out a 3A Racing one. has anyone here have one on and would you need an adapter as well?

cheers!

Don't have one on (if I ever get around to my custom airbox I will though - so many things to do...), but here are the dimensions;

Width: 160mm

Height: 130mm

Neck: 77mm

The neck goes onto the pipe, so I guess if the measurement fits, it should* fit straight on your AFM if you take the adaptor plate off.

Alternatively, you could have an adaptor plate made up to fit?

OR you could just put a good quality panel filter in.

I've got a Blitz SUS Power Kit but havent put it in yet. It's still new in the box and I might be selling it as the car "might" be going.

From past experience, I've had no issues with the SUS Power filter. I used this on a 350Z and going on the track a few times (and going off into the dirt), the filter has worked pretty well and found no issues with any dirt going beyond the filter itself. What I did notice was dirty it was in a short period of time so had to clean it by blowing compressed air from the inside out.

I've got a Blitz SUS Power Kit but havent put it in yet. It's still new in the box and I might be selling it as the car "might" be going.

From past experience, I've had no issues with the SUS Power filter. I used this on a 350Z and going on the track a few times (and going off into the dirt), the filter has worked pretty well and found no issues with any dirt going beyond the filter itself. What I did notice was dirty it was in a short period of time so had to clean it by blowing compressed air from the inside out.

They certainly are nice piece of kit.

Stainless Steel mesh, so no need to replace.

Can you post pics of the kit?

It is just the pod and the adaptor plate for attaching to the AFM, yes?

I paid about 70 bucks for a k&n panel filter, tho i have the power duct too.. probably the safest one to use i guess. f**k pods and other filters. hks ones cause loads of trouble for my precious front compressor wheel

  • 3 weeks later...
I paid about 70 bucks for a k&n panel filter, tho i have the power duct too.. probably the safest one to use i guess. f**k pods and other filters. hks ones cause loads of trouble for my precious front compressor wheel

Which panel filter from K&N fits the M35? There are a shitload of them and I can't find one listed for the M35 or V35 anywhere (I read somewhere the V35 has the same airbox).

Don't want to get the wrong one.

if its to fit in the standard airbox, then yes the V35 airbox is the same. AFAIK the Z33 may also take the same filter. come to think of it, its a fairly standard size and i bet you about 50% of japanese made cars will take it. when i put my blitz in, the back of the box listed probably over 100 car makes and models that it suited.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...