Jump to content
SAU Community

Recommended Posts

Hi Guys....

As allways, if there is something wrong, go to the guys with the info, as all that i've inquired about through this forum has lead to good info, i'm tryin again...

ok, my rear shocks on my m35 are leaking...i.e they're poked. so nissan will sell me genuine ones but to fit 2 new rears will be about $1000 and it seems getting aftermarket ones in new zealand is impossible as most peoples parts catalogues dont list an m35 to start with. i'm wondering what i need to ask for,

are they the same as v35 skyline ones?

what have you guys used?

are they the same as any other models aswell?

any help would, as allways be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/278161-m35-stagea-shocks-help/
Share on other sites

Hi Guys....

As allways, if there is something wrong, go to the guys with the info, as all that i've inquired about through this forum has lead to good info, i'm tryin again...

ok, my rear shocks on my m35 are leaking...i.e they're poked. so nissan will sell me genuine ones but to fit 2 new rears will be about $1000 and it seems getting aftermarket ones in new zealand is impossible as most peoples parts catalogues dont list an m35 to start with. i'm wondering what i need to ask for,

are they the same as v35 skyline ones?

what have you guys used?

are they the same as any other models aswell?

any help would, as allways be greatly appreciated.

As far as I know they are pretty unique.

at $1000 for rears alone, I would look at Tanabe NF coilovers - I just ordered a set at $1580 for all 4 - they are height adjustable and use the same spring rate as standard. Damping is a little firmer just to reduce body roll and excess bounce around corners. I got mine from JDM Concepts. I should have them in a week, but I have heard really positive feedback from other forum members using the same shocks.

Note* Apparently they wont work with HICAS (4 wheel steer) model M35's

if you have an ARX your selection is fairly limited but if you have an RS or RX then there is a larger selection available.

do a search on this and there is a large thread with this covered, also iamhe77 has kindly made a thread with many different brands of after-market suspension kits available for the M35.

i really do not understand the fact hicas matters or not

I think that is why the rear shock is bolted into the "top hat" that then bolts to chassis. I would presume that allows to shock to have some lateral movement without causing any problems.

$1k for the rears alone!!!! F*ck me!!!

Depends what you want.

If you need them to be height adjustible, look at Bilsteins or by all means go through the M35 Aftermarket Suspension thread and make your choice, than email RHD to get it listed and buy through them (you usually get a 5% discount if you buy the item you get them to list).

If you don't need height adjustment, go with the Nismo's.

RHDJapan has them listed new and will ship to NZ, just create an account.

RHDJapan is HIGHLY recommended for all new stuff :)

Edited by iamhe77

I would not consider the standard Nissan shock as it is a twin tube shock and not particularly good.

If you are going to replace them I would get something of a little better quality and at least a single tube design.

Cheers

Andy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...