Jump to content
SAU Community

Recommended Posts

I might have already asked this, but I have some 355mm 2 piece rotors that need very light machining and need to find a brake shop that has experience with large rotors / big brakes and has a good quality set up. The brake kit supplier warned me not to go near the 'high st' places to get this work done. I guess there is Race Brakes but that's over on the west side. Any located in the SE that you guys have used and know to be recommended.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/278382-brake-machining-specialist/
Share on other sites

Only ever used Howard at Race Brakes :laugh:

Just courier it to him, will cost you $10.

I could recommend you some decent guys at an ABS, but not sure of their expertise when it comes to larger rotors.

Edited by Birds

They came to my mind too. There is some politics between them and the people who supplied my brake kit (NSW based so I can't 'go' to them), so for that reason (and without making any judgements) I probably don't want to go there.

Any other suggestions are welcome.

Thanks.

where did you go?

Am going to Better Brakes in Cheltenham. I do not recommend them personally as I have yet to deal with them. 9585 0455. They do not have a workshop i.e. you need to pull the bits off and supply them to them. Same day rotor skimming service. Pick up and drop off.

I have used Better Brakes for a while now, never had an issue with them. They have great service and are very good at what they do, I think that you'll be happy with their work and service. Thats just my own opinion while dealing with them, let us know how you go.

I have used Better Brakes for a while now, never had an issue with them. They have great service and are very good at what they do, I think that you'll be happy with their work and service. Thats just my own opinion while dealing with them, let us know how you go.

Appreciate the feedback.

my experience at Race Brakes was shitehouse so would be keen to know how you go at Better Brakes (they are miles closer too)

And i'm sure Traction Tyres would be more than up for the job as well.

You have a specific performance workshop you take your car too? i'm sure most the big tuners would have preferred places .... hmmm... think i'll ask Trent today when i'm down there :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...