Jump to content
SAU Community

Recommended Posts

I think you will find is $100 per pair

Secondhand yeah around $50-$70

i mean indicators arent really a wearing item like wheels etc,

so they should really hold a decent value still

cam and anyone else if you dont get this pair and still want some lemme know

RiaZ

When you ring for prices on clear indicators do not mention you own a COMMODORE, these tricky blokes tend to rip off trevs who diss their civics etc

the price for them is ~$100 could be $105, i cannot recall.

this is for a Nismo item

now $200 will be for a Nismo item in japan and then shipped over here after the supplier and initial retailer and the smaller store retailer have all made their profits

i would be interested to know who quoted you $200 for a pair though

are they like a new form of clear steel of something....do they flip round to provide a shaved fender look??

FIRE BRINGER i will grab the part number for you and you can order it yourself through nissan in NZ.

ummm...the ones on those links are also flush with the panel....and not $200, and not $35 postage either.

$35 postage is quite a larf. did they send it express air mail via Beiruit or something?

if they must sell, they must sell, but I think that at $200, youve got a better chance of finding a well thought out metaphor.

Originally posted by zanda

$35 postage is quite a larf. did they send it express air mail via Beiruit or something?

:bahaha: :bahaha: :bahaha:

seriously though, i could prolly try get some cheaper ones that are under 100 bucks here in Perth

will get back to you guys later

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...