Jump to content
SAU Community

Recommended Posts

I was changing plugs and oil today, not too difficult, untill I found plug 6 full of oil, seeping from the rocker cover.

So off comes the intake plenum, plugs and wires everywhere. Got the cover off and I cant find anything wrong. I know there has been a drip onto the turbo occasionally, but the plug hole was full to the brim, there must be something wrong. Anyone else seen this one?

I used a sealant on everything and got it all together, now the engine light is on, probably from disconecting the throttle body? The car seems to drive ok with no obvious leaks.

Hopefully the tuner can organise a reset for me on tuesday when the emanage goes in.

Link to comment
https://www.sau.com.au/forums/topic/278768-oil-leak-onto-turbo/
Share on other sites

Sorry, the missus wont let me near the camera when Im that dirty.

I cant find any leak, but the rear plug on the passenger side was swimming in oil, this was then running down the rocker cover, dripping onto the turbo ex manifold. Very slow leak but over time filled the hole.

I cant see how the seal around the plug tube is removed, are there any pictures in fast?

  • 3 weeks later...
Sorry, the missus wont let me near the camera when Im that dirty.

I cant find any leak, but the rear plug on the passenger side was swimming in oil, this was then running down the rocker cover, dripping onto the turbo ex manifold. Very slow leak but over time filled the hole.

I cant see how the seal around the plug tube is removed, are there any pictures in fast?

Hi Scott

I came across this info today about the rocker cover seals leaking into the spark plug wells. Thought this sounded like your problem.

http://g35driver.com/forums/g35-sedan-v35-...arranty-up.html

Cheers

Andy

Hi Scott

I came across this info today about the rocker cover seals leaking into the spark plug wells. Thought this sounded like your problem.

http://g35driver.com/forums/g35-sedan-v35-...arranty-up.html

Cheers

Andy

Yep. That would be it.

Sounds like a VQ issue.

I put anerobic gasket sealent around the seal and tube, should do the job. Im not spending the $300 or more. We should all check the plugs, this problem will be worse on m35 due to the turbo heat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...