Jump to content
SAU Community

Recommended Posts

Hey guys & girls,

cracked my gearbox near the drain plug and was talking to a mate at work today who said there was some liquid stuff that acted like a weld and was good to a few hundred degrees, any ideas what it is/what it's called? is it any good? where can i get it?I was thinking of getting the crack welded up, not sure what would be a better fix.

a pic of the damage :D

post-59638-1247459922_thumb.jpg

i also found this tooth when i changed the oil in the gearbox, is it a syncro tooth or a gear tooth?

post-59638-1247459940_thumb.jpg

I assume it has been there a while as i haven't noticed any difference in the gears since i have owned the car.

Thanks Luke

Edited by 2FST4U.R33
Link to comment
https://www.sau.com.au/forums/topic/278937-crack-in-gearbox-housing/
Share on other sites

I reckon your mate is thinking of chemiweld and its used for a mildly cracked head on a boonga not a skylines gear box, sump plug looks a little worse for wear, if its not leaking oil i would leave it and get a new mechanic because who ever butchered that plug im guessing caused the crack

I have no idea about the tooth just drive easy and take note of strange noises

yeah the problem is it that the gearbox is leaking. That was how i found the bolt when i went to change the gearbox oil, it was definately over tightened i tried for about 10mins with a breaker bar before it came loose, i think i manged to pull every muscle in my arms, back and neck getting it undone, as well as burning myself countless times on the exaust.

I'd say it looks like a gear tooth. How much oil is it dropping? To weld it up you'll have to drop your gearbox oil again, weld then refill and hope the weld takes. Other option, if its only weaping a bit is to clean the cracked area with wax and grease remover, give it a light sand then put a smear os Sikaflex over the crack.

Oh and i'd be getting a new drain plug to, that one is well mangled

Edited by Jamesrb25

only discovered the crack once i had changed the oil. i think i may have put the crack in there when i took the plug out. :D

the only place in Whyalla that might weld it up say that they will probably want me to remove the gearbox, does anyone know anywhere in adelaide that will do it with the gearbox still in the car?

there is a putty that sets like a weld that may do the job considering it with stands heat and the sump isnt under pressure, note to ppl dont over tighten your sump nut!

Totally forgot about that! Devcon Steel Putty is the stuff, pretty sure they do one for aluminium too. Try a good hardware or industrial supplies store, they should have it

I think i might try some of the Devcon Steel Putty until i get it welded up, going to Rapid steel Fabrication 2nite to see how much they want to do it. Was Talking to one of my mates about it and he was saying you really need to weld it up from the inside, it that really nesecary?

Dose any1 know where i can get a new (or good second hand) plug from, i was thinking NissWreck or Adelaide Jap.

Edited by 2FST4U.R33
I think i might try some of the Devcon Steel Putty until i get it welded up, going to Rapid steel Fabrication 2nite to see how much they want to do it. Was Talking to one of my mates about it and he was saying you really need to weld it up from the inside, it that really nesecary?

Dose any1 know where i can get a new (or good second hand) plug from, i was thinking NissWreck or Adelaide Jap.

The steel putty I use goes rock hard when used, but can go soft again with heat. Be careful using it.

i used som liquid weld stuff last nite, yet to fill it with oil, will only be a temp fix getting a mate to weld it up on the 1st August. hopefully it holds till then. The stuff i brought is ment to be good to 800 degrees and is designed for use in and around engines, so i should be OK for a gearbox.

Edited by 2FST4U.R33
  • 3 months later...
sorry to bring an old thread up, but where would i be able to get a new gearbox oil sump plug from? As mine is worn off ... Do you guys think OEM nissan would have one? Thanks.

any wrecker with imports in their yard would have them. Nissan would certainly have them, but far more expensive.

go to nisswreck, japanese import spares or JMS - one of those 3 should sort u out

-D

  • 7 months later...
when i got my gearbox weled and re-tapped my mate put an engine one in instead, said it was stronger. not sure if it would be a straigt swap tho.

How much did it cost to get it welded? i have the same problem on one of mine

How much did it cost to get it welded? i have the same problem on one of mine

This is an old thread you brought back from the grave.

You can ask this kind of question in the wasteland thread, or check the Yellow Pages for any alloy welders (head work etc) that can do the job.

:)

At least the guy is searching the forum!

People cry when someone doesn't search.

People cry when someone does search.

Can't win.

Well said. People need to relax when an old thread gets bumped - its there for a reason

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...