Jump to content
SAU Community

R33 Gtr Bumper To Gtst

bumble_bee
 Share

Recommended Posts

2LV8ETR Mentor

2LV8ETR

Posted
Posted

The guards are the issue.

I have a VeilSide GT-R front bar on mine and I was able to coax it into place with a heat gun and a little gentle persuasion. You will need a warm day to do the job because the heat needs to be uniform over the bar when you bend it.

Needless to say the paint didn't appreciate the effort and it wrinkled slightly.

If you were going to start with a bar that needed painting, it can be done.

The other option is to buy a bar that has the GT-R look but the Gts-25t fit. Here's a link to Carmate that have them: CARMATE.

Good luck!

bumble_bee Rising Star

bumble_bee

Posted
  • Author
Posted

ah ok..but it will fit like mount up..??

the fender are different but towards the body not front..or mayb coz of the headlamps..

i heard gtr front bumpers wont fit series2 coz of the headlights are different, but fits on series1 33

or was this just a load of crap....

cheez Mentor

cheez

Posted
Posted

basically gtr bar wont fit gtst. like every1 said the guard issue and yes headlight issue too. gtr headlights are diff from both gtst series and wont leave an even gap by doing this.

go on ebay, search seller mybodykits, gtr bar is like 280 and all u need is paint and it will bolt up. i bought one a while back and fit mad. only thing like all aftermarket bars, u will have to place 2 packers under the bar at the headight corners to close the gap aftermarket bars leave or buy an aftermarket reo bar too.

bumble_bee Rising Star

bumble_bee

Posted
  • Author
Posted

this bar doesnt have the in-built grill that most fakes/copy have..

and thats spoze is the problem..esp on series 1..u get a gap.

the bumper iam getting is a fake aswel..but yea..its an odd one..so yea im just try to suss it out 4 now.

the only thing thats got me puzzled is wer the bumper bolts onto the corner of the front fenders..

ive seen this doin before on sereis2..and one guy made it..

i'll try find a pic.. and show u wat i mean.. his bar aswel didnt have the in-built grill..

  • 5 years later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...