Jump to content
SAU Community

Recommended Posts

Hi Guys

I've been thinking about building a RB26dett and putting it into my 33, although i have a few questions regarding it.

1.Since ill be keeping it RWD would my current RB25det box bolt up to the 26dett without an adapter plate? also would the tailshaft need to be a different length?

2.Could i place a R32 RB26 in a R33? or would it be best to keep to the same model (r33) so the loom is quite similar?

3.Am i looking at a good power differance compared to the 25?

4.Will it drop straight in? (engine mounts different?)

I did try and search but i couldnt seem to find what i needed answered.

hopefully someone has done this and kept it RWD,

Thanks for the help guys/gals

Richard

Link to comment
https://www.sau.com.au/forums/topic/280309-rb26dett-in-a-33gtst/
Share on other sites

There is a bloke in Townsville that has done this conversion.... You can find him on Qld street scene (www.queenslandstreetscene.com) and his user name is RB25_forever.

He'll be more than happy to answer any questions that you have :)

There is a bloke in Townsville that has done this conversion.... You can find him on Qld street scene (www.queenslandstreetscene.com) and his user name is RB25_forever.

He'll be more than happy to answer any questions that you have :D

Ask Marty what it ended up costing him aswell lol. I don't see the cost benefit. The amount of money that conversion cost him could have had a fully built RB30/26 or RB30/25 with what ever turbo selection you wanted, instead of a 220rwkw stock internal RB26 that ended up letting go.

It all comes down to what work you could do yourself, if you could do everything yourself (engine out, engine in, wiring new loom etc) than it wouldn't be too bad.

Just the cost of the engine, ECU, sump modifications, wiring harness, exhaust modifications, intercooler piping, mod plate etc. I would do the clutch, engine mounts, fuel pump and a couple of other things while i was at it.

It all adds up. All the little things that you don't think of start costing a bit. Trust me on that one.

Edited by PM-R33

i have done a 26 conversion to my 32, it might help with ya 33

i guess you know you will have to get the 26 sump modified for rwd

you might have to change ya engine mounts on the 26 with ya GTS-t ones

with wiring you will prob have to wire in a resistor pack for the injectors thats with the 26 wiring loom

you will get around the 300wrhp+ on a stock 26

  • 8 months later...
  • 3 months later...

Anyone have any specifics? I have a 26 with loom im trying to power up. As i don't have the factory body loom i need a bit of info

I'm just trying to power up everything properly.. do i just run positive to the 2 relays near ecu or do i run it to the plug on the driver strut tower?

Anyone have any specifics? I have a 26 with loom im trying to power up. As i don't have the factory body loom i need a bit of info

I'm just trying to power up everything properly.. do i just run positive to the 2 relays near ecu or do i run it to the plug on the driver strut tower?

Is it an R33 RB26 loom you are using? Do you have a series 1 or 2 R33?

Ive got an r32 loom going into a race car with no loom whatsoever. Ive so far sorted out the power feed for the resistor pack and found the injector feeds in one of the big plugs on what i assume is the passenger guard part of the loom near the afms.

I'm sure you must be able to just run one or two power feeds to the loom somewhere on these plugs but i can't trace where. not having seen the original car makes things a bit tricky.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...