Jump to content
SAU Community

Recommended Posts

Let me stress I am VERY new to car modifying.

Reading up on the exhaust which from what I can gather is a very important mod.

So, from the turbo you have your dump pipe, right? This goes into a front pipe then to the exhaust or is the front pipe a part of the exhaust?

So if I wanted to throw a full replacement system on my car I'd want the Legalis R, a dump (which I have not even started researching) and then what else? I want to hit that entire system in one go.

Excuse my newbyness :)

for a full kit, i'd buy an off-the-shelf kit for stageas. i know Just Jap have a couple here, so they can be had. finding the right one is a little difficult though.

generally, for turbo cars, you can't go wrong with a full 3" mandrel bent system with some form of high flowing catalytic converter (or you could just put in a de-cat pipe, but it will fail emissions, should you ever get checked, you might blow a few flames too and it'll be louder).

a full exhaust system generally consists of:

1. dump pipe - comes out of the back of the turbo, generally has the O2 (oxygen) sensor in it

2. front pipe - goes from the dump pipe, down to the underside of the vehicle

3. the rest of the exhaust - made up of sections of pipe, mid-mufflers, resonators, catalytic converters and a final muffler with a tip (note, a legal exhaust system would be made up of these bits)

there are typically two different types of bends in exhausts, press bends and mandrel bends. mandrel bends are the same consistent diametre through the length of the bend, whereas press bends become smaller. a larger press bent exhaust will do the same as a smaller mandrel bent exhaust (i don't know the ratio's, but generally it's considered that a 4" press bent exhaust, will flow the same as a 3" mandrel bent).

all-in-all, an exhaust system isn't really a very important mod, unless it's done wrong. there is a science to it (like everything motoring related). to shorten it down though, a bigger exhaust will flow more gas, which in a turbo application, is what you want. unfortunately, a bigger exhaust has it's drawbacks, such as loudness and it will detract from your bottom end power (which is generally considered a lost cause in turbo cars anyway, so no great loss).

there are also different types of dump pipes. generally it'll come down to a split dump, or a bellmouth dump. most people choose bellmouth and i'm yet to see any performance gain from a split dump 9but i'm no expert).

jap brand name kits are also considered to be of better build quality with a better power output too, but will cost you more $$ than a generic kit. i'm yet to see any side-by-side comparisons though, proving one way or the other.

I couldn't find any exhaust kits for the M35 on Jast Jap but give them a call if you want one from Japan, I am sure they could source one for you.

There are now a few good exhaust shops in Sydney (not sure where you live) that can build you a custom exhaust to your specifications. I used Charleston Exhaust in Blacktown as he has now done 5 M35's which in Australia makes him almost an expert on the car. (or as close as you can be)

There are also 3 exhaust shops in Sydney working on dump pipes and these should be available very soon.

I decided to buy local as you then have local help if you are to have any problems and I could not see any evidence that the Japanese systems would have any benefit over a local unit and cost with the yen was cheaper.

Cheers

Andy

I decided to buy local as you then have local help if you are to have any problems and I could not see any evidence that the Japanese systems would have any benefit over a local unit and cost with the yen was cheaper.

Cheers

Andy

Hot to know a local product as I think it is important to help the local economy... but your point about the local "help" if you have any problems is not relevant with Jap exhausts.

They are amazing quality (I had a group of 5 big HP GTR owners ogling my Legalis when it was being put on), include good quality gaskets and bolt straight up... even if you mix your manufacturers of use parts of the OE exhaust.

I will be going local for my dump as I want an 82mm dump as my Kakimoto front pipe is 80mm & I want to make the most of it (even if it makes sweet f*ck all difference).

Michael, yes a full exhaust is generally made up of 3 sections.

1. Dump pipe - from the turbo. Short and almost 'S' shaped in the M35.

2. Front pipe - from the dump (commonly contains that main cat). A bit over a metre in length with two 45degree(ish) bends which allow it to bolt up without modification.

3. Exhaust or Cat-back - these are you Fujitsubo Legalis's, Kakimoto R's etc and mainly dictate your exhaust note and how loud it will be.

I'm in Brisbane (well, the sunshine coast but brisbane is my capital) but I do go to Sydney twice a year or so, normally fly but I guess I could drive it I really had to :D

Okay, thanks you guys. Now I actually understand what makes up the full system (from front to back) I'll be able to research it a bit more thoroughly :thumbsup:

I've had 3 exhausts put on 3 separate cars, all of them locally custom-made for the car (mandrel bends etc). The workmanship was fantastic, but if I were to do it again I'd be looking at an off-the-shelf one from japan - one that has been designed for the stagea.

The reason is that local exhaust places are great at welding and bending a nice 3" piece of pipe. And to quieten it down they know how to put some mufflers or resonators (=drone in a wagon) in. Dont get me wrong, they do a fantastic job for a lot of cars, but with a wagon, noise / acoustics play a huge part.

The jap ones that are designed specifically for the stagea are actually engineered to produce a nice sound, sometimes a quiet sound. A lot of testing goes into it and what you're buying is not just a pipe, its a piece of performance and sound engineering, blended into one. Also when you buy one of these, the manufacturer can show you exactly what the car will sound like, and exactly the performance gains to expect when installing on a stock stagea. And they dont just make it quiet. They focus on making it quiet across specific rev ranges so that you can still hear the exhaust when you belt it but not when cruising.

A lot of them also have twin pipes out the rear muffler - which produces the same airflow but with less noise.

There really is no comparison between the way they sound. Even the jap ones sound different to each other. Have a search on youtube for "VQ25DET engine" or something like that. There's a clip on there that just shows the exhaust tip on a white M35 and it just sounds awesome!

One last thing, if you get an exhaust, you might want to also check out an aftermarket ecu. Thats my view anyway.

Edited by pixel8r
I've had 3 exhausts put on 3 separate cars, all of them locally custom-made for the car (mandrel bends etc). The workmanship was fantastic, but if I were to do it again I'd be looking at an off-the-shelf one from japan - one that has been designed for the stagea.

The reason is that local exhaust places are great at welding and bending a nice 3" piece of pipe. And to quieten it down they know how to put some mufflers or resonators (=drone in a wagon) in. Dont get me wrong, they do a fantastic job for a lot of cars, but with a wagon, noise / acoustics play a huge part.

The jap ones that are designed specifically for the stagea are actually engineered to produce a nice sound, sometimes a quiet sound. A lot of testing goes into it and what you're buying is not just a pipe, its a piece of performance and sound engineering, blended into one. Also when you buy one of these, the manufacturer can show you exactly what the car will sound like, and exactly the performance gains to expect when installing on a stock stagea. And they dont just make it quiet. They focus on making it quiet across specific rev ranges so that you can still hear the exhaust when you belt it but not when cruising.

A lot of them also have twin pipes out the rear muffler - which produces the same airflow but with less noise.

There really is no comparison between the way they sound. Even the jap ones sound different to each other. Have a search on youtube for "VQ25DET engine" or something like that. There's a clip on there that just shows the exhaust tip on a white M35 and it just sounds awesome!

One last thing, if you get an exhaust, you might want to also check out an aftermarket ecu. Thats my view anyway.

Thanks a ton, I think I am definitely leaning towards the Legalis but I just need to decide on the dump and front pipe? Any suggestions of which Dump would suit me? Looking at mid-upper range gear.

With the ecu, I was planning on doing that in my "second stage" of mods. Keeping in mind I am an uber noob so this is subject to change:

Stage 1: Full exhaust (including all pieces), new panel filter.

Stage 2: High flow turbo, new ecu/some ecu mod, new wheels.

After that I'll just go through one at a time. By "stage" I mean everything listed under that will be done in one hit. First I need to get my alarm and cruise control done though...

I've had 3 exhausts put on 3 separate cars, all of them locally custom-made for the car (mandrel bends etc). The workmanship was fantastic, but if I were to do it again I'd be looking at an off-the-shelf one from japan - one that has been designed for the stagea.

The reason is that local exhaust places are great at welding and bending a nice 3" piece of pipe. And to quieten it down they know how to put some mufflers or resonators (=drone in a wagon) in. Dont get me wrong, they do a fantastic job for a lot of cars, but with a wagon, noise / acoustics play a huge part.

The jap ones that are designed specifically for the stagea are actually engineered to produce a nice sound, sometimes a quiet sound. A lot of testing goes into it and what you're buying is not just a pipe, its a piece of performance and sound engineering, blended into one. Also when you buy one of these, the manufacturer can show you exactly what the car will sound like, and exactly the performance gains to expect when installing on a stock stagea. And they dont just make it quiet. They focus on making it quiet across specific rev ranges so that you can still hear the exhaust when you belt it but not when cruising.

A lot of them also have twin pipes out the rear muffler - which produces the same airflow but with less noise.

There really is no comparison between the way they sound. Even the jap ones sound different to each other. Have a search on youtube for "VQ25DET engine" or something like that. There's a clip on there that just shows the exhaust tip on a white M35 and it just sounds awesome!

One last thing, if you get an exhaust, you might want to also check out an aftermarket ecu. Thats my view anyway.

So, I guess you work for the marketing arm of one of the bigger exhaust manufacturing companies in Japan?

That white Stagea on Youtube has the Takero's "Full Titan".

You can find the Youtube clip with the Takero's details in the M35 Aftermarket Exhausts thread. Hopefully that will give you some idea of the JDM cat-backs available.

dont forget to mention that a jap exhaust designed for that car will literally just bolt on. no mods necessary.

Did we?

Thanks a ton, I think I am definitely leaning towards the Legalis but I just need to decide on the dump and front pipe? Any suggestions of which Dump would suit me? Looking at mid-upper range gear.

With the ecu, I was planning on doing that in my "second stage" of mods. Keeping in mind I am an uber noob so this is subject to change:

Stage 1: Full exhaust (including all pieces), new panel filter.

Stage 2: High flow turbo, new ecu/some ecu mod, new wheels.

After that I'll just go through one at a time. By "stage" I mean everything listed under that will be done in one hit. First I need to get my alarm and cruise control done though...

Can't go wrong with the Legalis. Love mine (but if you find the "Zenki" M35 Nismo exhaust with the 2 square tips, I would be interested in trading). Quiet, but also gives off a beautiful burble and can certainly give a bassey scream when the car is booted.

Front pipes? Do you want de-cat? If so, Kakimoto and Freeway-Dolphin both do an 80mm de-cat front pipe (really enhances the Legalis' sound).

If you want the cat, I would suggest something local as there is nothing available that is JDM off the shelf stuff.

Edited by iamhe77
So, I guess you work for the marketing arm of one of the bigger exhaust manufacturing companies in Japan?

Haha, maybe they'll offer me a job?

I'm just comparing the exhausts I've had on my cars (basically a 3" piece of SS pipe, mandrel bent to fit in around the diff etc) sound with the youtube clips and manufacturer videos for JDM exhausts. The ones I've had always sounded a bit unrefined or droney, nothing like the sound of a kakimoto or fujitsubo exhaust.

Plus that Takero "Full Titan" one is the best I've heard. ever.

Performance wise you probably cant really go wrong with a 3" pipe, but I'd like to think the JDM ones are geared at maximum performance too.

Haha, maybe they'll offer me a job?

I'm just comparing the exhausts I've had on my cars (basically a 3" piece of SS pipe, mandrel bent to fit in around the diff etc) sound with the youtube clips and manufacturer videos for JDM exhausts. The ones I've had always sounded a bit unrefined or droney, nothing like the sound of a kakimoto or fujitsubo exhaust.

Plus that Takero "Full Titan" one is the best I've heard. ever.

Performance wise you probably cant really go wrong with a 3" pipe, but I'd like to think the JDM ones are geared at maximum performance too.

Completely agree with you Steve, which is why I have the combination I have on my car.

Could have gone with a local exhaust, but the prices I was quoted at the time were higher than getting my JDM front pipe and exhaust landed and installed.

... but that was when the dollar was about 95yen. :P

1. Dump pipe - from the turbo. Short and almost 'S' shaped in the M35.

2. Front pipe - from the dump (commonly contains that main cat). A bit over a metre in length with two 45degree(ish) bends which allow it to bolt up without modification.

3. Exhaust or Cat-back - these are you Fujitsubo Legalis's, Kakimoto R's etc and mainly dictate your exhaust note and how loud it will be.

I'd put the CAT in its own catagory as it is can be upgraded and there isnt really any point in using your stock CAT with a turbo back system. It would be like holding a gooses neck while it was trying to swallow. :P

just reminded me of that insurance ad where the flock of geese decend and everyone crashes, then the goose swipes that woman's purse...

the wife and housemate's sitting in the lounge in silence, slightly amused and all of a sudden i go, "JUST SNAP THE BASTARDS NECK!" needless to say, they both shat themselves and i was promptly scolded :P

/off topic lol

Edited by pyro-ns
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...