Jump to content
SAU Community

How To Stop Licence Plate Theft

Phatboy

By Phatboy,
in Victoria

 Share

Recommended Posts

nizmo da gizmo Collaborator

nizmo da gizmo

Posted
Posted
How do you remove them? There must be a special tool?

I'd rather get them from Vic Police rather than interstate on eBay as I can be certain the removal tool will be available.

Go to bunnings , they sell them in the builders department. I know because i work there lolz

Link to comment
https://www.sau.com.au/forums/topic/281179-how-to-stop-licence-plate-theft/
Share on other sites
_Ryan_ Grand Master

_Ryan_

Posted
Posted
Vic Police had a stand at the Melbourne F1 this year for the one way screws. You just had to tell them what car you had and they looked it up in their book and gave you the best screws to use.

I haven't even looked at them yet because I was going to wait to order personalised plates before using them.

Maybe you can still pick them up from police? :\

pretty sure most cop shops will hook you up

Phatboy Mentor

Phatboy

Posted
  • Author
Posted

Hi guys, my mate just bought some personalised plates, but as he doesn't have a garage, has to park his car outside. I am also looking into getting custom plates.

I had a bad experience 2 years ago with people stealing my plates outside and then, I guess, using it for petrol station theft (this was in the bad old days of $1.60/L prices). It wasn't customised, so I ordered new standard plates,.

If it was personalise plates, could you re-order the same ones or would it have to be a different combo? I would be gutted if I lost my combo. I was looking around at ways to deter licence plate theft and I stumbled on this:

http://www.drive.com.au/Editorial/ArticleD...ArticleID=57071

I totally didn't know about this when it was on. Does anyone know if this service is still available anywhere?

Had a look at eBay without much success. Only listing I could find was this:

http://cgi.ebay.com.au/8-x-ONE-WAY-NUMBER-...bayphotohosting

I don't understand how they can be one-way screws when they are screwed in with any normal screwdriver, look like normal screws, and apparently don't need a specialised tool to unscrew.

Any advice greatly appreciated.

UnCo Rising Star

UnCo

Posted
Posted

Vic Police had a stand at the Melbourne F1 this year for the one way screws. You just had to tell them what car you had and they looked it up in their book and gave you the best screws to use.

I haven't even looked at them yet because I was going to wait to order personalised plates before using them.

Maybe you can still pick them up from police? :\

Phatboy Mentor

Phatboy

Posted
  • Author
Posted
If you look at the screws closely the edges that get hit by the screwdriver when undoing are ramped, causing the drive to pop out of the slot.

100px-Screws_-_tamper_resistant_slotted.jpg

How do you remove them? There must be a special tool?

I'd rather get them from Vic Police rather than interstate on eBay as I can be certain the removal tool will be available.

AGE Veteran

AGE

Posted
Posted
Alen keys bolts.

and put a bolt on the otherside, and if you like, lock tight also, and number plate proctectors position right your can get any fingers under there :)

Or one better would be Torx bolts.

2094.jpg

W0rp3D Grand Master

W0rp3D

Posted
Posted
Alen keys bolts.

and put a bolt on the otherside, and if you like, lock tight also, and number plate proctectors position right your can get any fingers under there :pirate:

Instead of loctite use a lock nut, that way the only way to get it off is a spanner on each side.

Dont know where to get them from but there is a bolt that once it is torqued up to a certain pressure the head snaps off, you either ues a chisel/angle grinder or have to cut a grove in the top to use a screw driver.

Omurru Veteran

Omurru

Posted
Posted
Dont know where to get them from but there is a bolt that once it is torqued up to a certain pressure the head snaps off, you either ues a chisel/angle grinder or have to cut a grove in the top to use a screw driver.

The drive snaps of the nut normally and they just have a flat head, the ones we use at work are called Hi-Locks, Put a big penny washer under the head of the fastner and nut as well, makes it harder to rip off the number plate....

rs73 Grand Master

rs73

Posted
Posted

use a nail gun and nail it along the border of your number plate.

that's what we have to do in Asia. as soon as we bought our new 1989 toyota corolla se (back in 1989) we took it to a workshop to have one of the guys there to nail gun all badges, YES, those are the toyota logo, the 1.6SE badge at the boot, etc. Put a screw on the grill toyota badge as well.

so they don't go missing.

W0rp3D Grand Master

W0rp3D

Posted
Posted
Maybe I'm missing the obvious, but if you can't get them off, how the f**k do you get your plates off when you want/need to?

When do you want to?

But if your happy to make it easy for someone else to get your plates off because MAYBE one day you MIGHT need to take them off then you'll just have to deal with it when there stolen.

dezz Grand Master

dezz

Posted
Posted
When do you want to?

But if your happy to make it easy for someone else to get your plates off because MAYBE one day you MIGHT need to take them off then you'll just have to deal with it when there stolen.

Considering this is a website of car enthusiasts...Car shows, DECA, track days and so on.

ANK Enthusiast

ANK

Posted
Posted

screw a metal strip into your bumber or where ever its meant to go make sure you drill holes in it prior to putting it on that match your number plate screw holes then potrivit your number plate to the metal strip if you need to get them off you just use a drill the number plate will cover the screws that are holding the metal stip to your bar :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...