Jump to content
SAU Community

Recommended Posts

That's why I want the ones that are easily removed by the special removal tool (which only cops/manufacturers have access to apparently), like the ones the cops were giving out for free last year.

Pm me for the simple answer to removing the 'theft proof screws'.

The easiest is the Torx bits....cheap to pick up, Easy to remove, but you need Torx bit/driver/key set, and it's about $50 for them.

Failing that if you don't mind using nuts and bolts would be using cup head bolts....

Exhibit A (Not to size, obviously)

cup-sq-bolt.gif

Pm me for the simple answer to removing the 'theft proof screws'.

The easiest is the Torx bits....cheap to pick up, Easy to remove, but you need Torx bit/driver/key set, and it's about $50 for them.

My memory may be wrong but i believe i paid about $20 for my kinchrome set, just the bits you use then with a 3/8 ratchet.

so now you can see even with theft tamper proof, any thugs out there planning on robbing some convenient store or bank would see even $50 investment in torx key as a very worthy investment....

that said, nothing, not even theft proof bolts will save number plates from being stolen

so now you can see even with theft tamper proof, any thugs out there planning on robbing some convenient store or bank would see even $50 investment in torx key as a very worthy investment....

that said, nothing, not even theft proof bolts will save number plates from being stolen

At the end of the day though it is just a deterrent, if you have personalized plates that some one really wants there going to get them, but in the case of some one who just wants plates for a drive off or robbery the next car up the road is going to have normal screws so they will just move along.

The one way screws are available from REPCO stores for about $5 for a pack.

The pack contains different sized self taping screws and also threaded screws (6 or 8mm, cant rember).

They can be removed fairly easy, but would slow someone down enought to think twice about your plates, unless they realy want them (nothing will save your plates then).

You know what works for me? 1 inch stainless steel pop rivets. quick simple to install and good luck trying to drill them out.

^^^Now that's a great idea!!!

Ad some of this, P_SelleysLiquidNailsHighStrength.jpg and those plates aren't going anywhere. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...