Jump to content
SAU Community

Recommended Posts

Might sound like like a silly question but without a detonation or knock sensor how can you tell if your engine is detonating?

Curious because not sure how much a standard internal RB20 can take before breaking conrods n big ends

everyone has a different description.

It can sound like small stones on a tin roof, or stones kicking up under the guards.

To tell - ask your tuner.

Stock RB20 innards will easily run 260rwkw day in day out.

Know of any videos of engine detonation sound? cant find any on youtube My car has these mods atm -

HKS 2530 Turbo

GTR Injectors

GTR Ballast Resistor Pack

Bosch 040 Intank Fuel Pump

Hybrid Front Mount

Z32 AFM

Turbo Back 3" Exhaust

5 Puck Brass Button Clutch

Car needs tune atm the guy i bought it off had it tuned by PITS in Qld anyone know who they are?

Apparently got 220RWKW at 16PSI

I need to get it tuned, how much boost is this setup capable of?

How long is a piece of string?

Twice the distance from the middle to the end. :)

I always thought detonation sounded like an olllld diesel hehe. Its not a nice sound, so if it does it, youl know.

Try taking off up a steep hill in 2nd. tickticktick

If detonation sounds that bad then ive not noticed it yet thank god. I dont have a tuner yet I live in Nothern NSW On the beach there isnt any good tuner shops here i was thinking of taking it to mercury motorsport for a nistune until i can save for a Power FC or whatever

yeh matt spry is claimed one of the best in QLD so u should be fine unless things have been changed since the tune.. are u askin about the sound cause u can hear it or your just worried? doesnt it feel fast?

just tryin to figure out the reason of the question

yeh matt spry is claimed one of the best in QLD so u should be fine unless things have been changed since the tune.. are u askin about the sound cause u can hear it or your just worried? doesnt it feel fast?

just tryin to figure out the reason of the question

Sounds like good news to me! The only problem with the car is its running pretty rich (it chews the fuel) and black soot covers the rear bar lol Other than that is the broken exhaust manifold stud which im about to try fix which i guess caused a bit of surge hard on the gas in 3rd or 4th

About detonation was just curious as to how much boost I could run with this setup, its pretty happy on 14psi which is fairly close to 1 bar right? (my boost guage is in BAR not psi) would 18 psi be ok you think? the guy i bought it off said 18psi is pretty fun haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...