Jump to content
SAU Community

Recommended Posts

APPARENTLY R32s are getting that way in Japan already with vehicles like the Nismo, N1s and V-specs starting to get snapped up at auction by Japanese rather than being left for the the Aussies or Poms. Personally I doubt that the rarer R32s will go down in value much (if at all) from now on. They had enough of an impact on the Motorsport world and the car industry that they will continue to be recognised long into the future. But if they don't and my car is worth 5k in 10 years... I won't care, because for 5k or 500k it won't ever be for sale.

Ian is absolutely right. The 94 Vspec2's with log books are going for a bomb, I saw one not long ago (a low k unit) up for $74k complied. I was looking at them just before the gfc and was going to spend around 35k for a nice one + ship, duty taxes and comp. Check out carsales.com for a good listing of GTR's. The is an Aussie delivered one on there also which are very rare.

I was offered $10k more the day after i bought mine so i gues they're going up in value :whistling:

I think they'll definitely go up, but I also think they're still to common to consistantly demand high prices. I don't think they'll officially be a classic for at least another 20yrs or so.

I think the biggest probs though are around the lack of English documentation and Nissan verified specs on the GTR's.

Merc for example have an annual book which shows every model, all VIN/chassis #'s, all varients, all options on varients and their current avg price. Something like that ups the prestige of certain cars. I think Nissan need to get their sh!t together and start publishing some English documentation.

what are peoples thoughts on GTR skylines like series 3 etc etc being collectors items in the future

What series 3??

You can get cheap examples of 32, 33 and 34 gtr's because they were mass production vehichles... so outside rare models and immaculate condtion examples they will just keep going down as they get older.

I wont ever sell mine though, so dont really care.

You can get cheap examples of 32, 33 and 34 gtr's because they were mass production vehichles... so outside rare models and immaculate condtion examples they will just keep going down as they get older.

agreed. its a mass production family sedan at the end of the day, so it'll drop like tits with age, unless its a limited edition, in concourse condition or extensively or uniquely modded.

i guess it'll be like a ford falcon... you can pick up a shitty old XA, XB or XC sedan for a grand or less, but the coupes are worth an arm, a leg and a firstborn.

DON'T FORGET!

We also have to do our bit!!!

1) Keeping our cars well-serviced.

2) Looking after panels & hinges

3) Tending to brakes, susp'n, running gear

This makes our cars DESIRABLE > MARKETABLE > HIGH-PRICED!!!

SO ARE YOU A FASHION FOLLOWER or a FASHION LEADER?

what are peoples thoughts on GTR skylines like series 3 etc etc being collectors items in the future....will they eventually be seen to as classics like American muscle cars are?
SERIES 3 R33 GTR? YEH ESPECIALLY THE VSPEC. THERES ONE OF THE TOP MODEL ONES WITH RARE FACTORY OIL COOLER AND STUFF IN THE FOR SALE THREADS AT THE MOMENT.... I WANA GET MY HANDS ON IT ON A INVESTMENT COS ESP IN THAT CONDITION N ALMOST STOCK ITS RARE AS.... TRYIN TO GET A LOAN AS WE SPEEK. Edited by matty09
SERIES 3 R33 GTR? YEH ESPECIALLY THE VSPEC. THERES ONE OF THE TOP MODEL ONES WITH RARE FACTORY OIL COOLER AND STUFF IN THE FOR SALE THREADS AT THE MOMENT.... I WANA GET MY HANDS ON IT ON A INVESTMENT COS ESP IN THAT CONDITION N ALMOST STOCK ITS RARE AS.... TRYIN TO GET A LOAN AS WE SPEEK.

That's the R33 GTR N1.

If you can get that, that would be farken sweet!

I can tell you I've bumped up my insurance cover on mine by $30K since I've owned, based on a couple of discreet inquiries...rare ones are already going up in value in Japan. I know of a certain Australian buyer who recently handed over $90K landed and complied for a 5000km R32 GT-R V-Spec 2...

I would presume it was one that I saw go through auction about 6 months ago. Pretty sure it was silver, but there have been a couple of other low-km ones go through since too. I heard that from the workshop that did the compliance. Owner works in the mines, planning to use it as a daily....

lol nah just kidding, I don't know what plans the new owner has :P

Man I had about 4 on the go at the one time, that was one of them. Wish I had bought it then, it was around 30k + ship etc etc. I got an ADM unit anyway so am still pretty happy.

That silver one still had the factory plastic on it from memory.

Edited by RBNT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...