Jump to content
SAU Community

Recommended Posts

performance wise would the PM35 stag , keep up with the nm series turbo stag , i know power delivery would be different , but how much so ? :(

I guess as it is the VQ35DE it would have performance similar to a V35 but with a heavier body.

From what I have read the V35 coupe is doing about a 6.7-6.9 0-100 and the M35 is meant to be about 6.5 - 6.7 0-100.

So I would imagine it would be a tad slower than the Vq25DET.

I also saw today that the 2WD version of the PM35 has a slightly higher diff ration than that of the 4WD version. I guess this is because it would be putting a little more power to the driving wheels (2 only) than the 4WD equivalent.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4751807
Share on other sites

I guess as it is the VQ35DE it would have performance similar to a V35 but with a heavier body.

From what I have read the V35 coupe is doing about a 6.7-6.9 0-100 and the M35 is meant to be about 6.5 - 6.7 0-100.

So I would imagine it would be a tad slower than the Vq25DET.

I also saw today that the 2WD version of the PM35 has a slightly higher diff ration than that of the 4WD version. I guess this is because it would be putting a little more power to the driving wheels (2 only) than the 4WD equivalent.

cheers, that rests my case . stick with the nm35 , unless i can come up with the money to turbo the pm35 :( $$$$$$$$$$$$$$$$$$$$.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4752802
Share on other sites

Don't bag a PM35 unless you've driven one. I initially had my doubts as well but after driving one for 20 minutes, I was truly hooked.

Imo I reckon a PM35 2WD will go as good, if not better than a 4WD NM35. The gearbox is also improved as well in the later models so manual shifting feels a lot more crisp and responds better than the older NM35's.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4752867
Share on other sites

Don't bag a PM35 unless you've driven one. I initially had my doubts as well but after driving one for 20 minutes, I was truly hooked.

Imo I reckon a PM35 2WD will go as good, if not better than a 4WD NM35. The gearbox is also improved as well in the later models so manual shifting feels a lot more crisp and responds better than the older NM35's.

i'd love the current version , but i'd like awd, and i think the awd pm35 might be a bit sluggish, with the extra weight , but then again haven't driven so im being ignorant, might have to see if i can organise a side by side driving test , once compliance is finished with the pm35.

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4752950
Share on other sites

The power delivery would be completely different. The NM35 has higher PEAK power and torque but I'd be willing to bet the PM35 has significantly more power and torque up to say 2200-ish rpm, possibly higher.

Dont just look at the power figures on paper, thats just the maximums. If they could quote you "average" torque figures, or if you could get hold of a dyno graph of each (showing power and torque), that might make it easier to compare.

This means that driving around town the PM35 would have a fair amount of get-up-and-go, more so than the turbo model. One extra Litre ought to make quite a difference to low-end torque.

The power delivery would be much more linear in the PM35. but no turbo, no fun - I say, although if you're not into turbos then this isn't likely to matter one bit.

The PM35 would also be better on fuel too. There are many things in its favour...but I'd miss the turbo. :P

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4753128
Share on other sites

The PM35 would also be better on fuel too. There are many things in its favour...but I'd miss the turbo. :P

You would think so... Official numbers state that the VQ35DE powered PM35 is worse on fuel than the VQ25DET powered NM35.

PM35 (VQ35DE) - 8.2km/L = 12.1L/100kms

NM35 (VQ25DET) - 8.9km/L = 11.1L/100kms

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4753143
Share on other sites

You would think so... Official numbers state that the VQ35DE powered PM35 is worse on fuel than the VQ25DET powered NM35.

PM35 (VQ35DE) - 8.2km/L = 12.1L/100kms

NM35 (VQ25DET) - 8.9km/L = 11.1L/100kms

That's could just be the Nissan factory tunes getting worse and worse!

Most people I've spoken to who have been dynoing Nissan vehicles (including imports) have said most of the models just run way too rich, they mainly put it down to bad tuning. Who know's, maybe the fuel companies have a handshake agreement with Nissan :down:

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4753587
Share on other sites

That's could just be the Nissan factory tunes getting worse and worse!

Most people I've spoken to who have been dynoing Nissan vehicles (including imports) have said most of the models just run way too rich, they mainly put it down to bad tuning. Who know's, maybe the fuel companies have a handshake agreement with Nissan ;)

So a tuner thinks that Nissan make a bad tune for a car they build from the ground up, meaning the tuner can do better?

Being that Nissan program the ECU from scratch to have the car appeal to wide audience (more sales), with high reliability...

That is probably not a statement the tuner can back up.

Having said that, I will be in line (eventually) to have my ECU re-mapped.

It's not really bad tuning. The cars run rich so that it reduces the chances of an engine failure.
:)

That's what I heard as well.. Better to be too rich and use a bit more fuel than the lean out and grenade the engine...

:stupid: 's

Link to comment
https://www.sau.com.au/forums/topic/282150-pm35s/#findComment-4754330
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...