Jump to content
SAU Community

Recommended Posts

Hi Guys,

Dos anyone here know where I should go in order to get a custom made cat back exhaust made up that will fall within the 92db range. My curent 3 inch turbo back system flows well, but is really loud. I'm looking for something that is relatively quiet, yet still flows well.

I went to see a well known exhaust place in Campbellfield earlier today and they told me not to bother, as you can't get a decent flowing 3 inch exhaust system that will still be legal. I'm not sure if they were telling me porkies, because I've heard it can be done.

Does anyone have any recommendations as to where I should go in order to have this done? R31Nismoid, if you're reading this, where did you get your system made up? (I read in another thread that your system is pretty quiet).

Thanks people.

Adam.

both my cars are legal with magnaflow setups.... Stagea is Catco highflow cat, generic mid muffler with magnaflow rear, Rowville exhaust centre did the work

32 is just a magnaflow rear with an EVC, was a cannon before that, massive difference, might swap the EVC for another muffler at some point though... Glen at Mufflers and more did that diff back- 0450 675 984

+1 for Racepace, if budget permits.

Speaking from personal experience, I have a Racepace 3.5 inch custom exhaust which is quiet as stock, but gives high flow. I have not had any complaints from EPA, neighbours and cops.

Now I am upgrading to a 4 inch :P

According to the EPA letter I recieved its 92db.

Great! I hope thats the same across different state (I should check that out). I'm a bit paranoid over the limit as mine is just on the line of 92 and thinking that 90 is the limit kinda made me wanna downgrade to a quieter Regu06 (Justjap just had them in stock). Thats a thumbs up for people chasing legal exhaust dB as I find 90dB is almost impossible to reach for most aftermarket exhaust (as it varies from mods and vehicle). Heres the ADR I've got and I've seen someone posting a vehicle model specific test rpm level on the forum before too.

ADR_28.01_FRLI_Mar_06.pdf

Its not 92 dB, read the letter again :ermm:

Aaah, damn it. Must have read it wrong, there are a whole bunch of numbers and big words and stuff, i'm easily confused :)

How much $ do you think i'd be looking at in order to get a legal exhaust made up by these racepace guys, Nismoid?

ive got an exhuast that im willing to start renting out, its not a 3 inch but makes your car so quiet that its funny. Its a cat back exhaust. Its approx 106mm from the centre to centre of each bolt. It has a 52mm tip. No kidding, it is really quiet, sounds quieter then the missus' hoover. Im willing to rent it out at a slab of jim beam or $80 plus $300 deposit, to be returned when the exhaust comes back. Im also willing to help put it on. I will only help if available.

This was purchased to pass an epa when i got done for being to loud with my cannon. Got used on epa test only. This passed my r33 gtst at 82 db!!

ive got an exhuast that im willing to start renting out, its not a 3 inch but makes your car so quiet that its funny. Its a cat back exhaust. Its approx 106mm from the centre to centre of each bolt. It has a 52mm tip. No kidding, it is really quiet, sounds quieter then the missus' hoover. Im willing to rent it out at a slab of jim beam or $80 plus $300 deposit, to be returned when the exhaust comes back. Im also willing to help put it on. I will only help if available.

This was purchased to pass an epa when i got done for being to loud with my cannon. Got used on epa test only. This passed my r33 gtst at 82 db!!

Thanks anyway mate, but i kept the stock exhaust, so i'm gonna change it back on the weekend. I think I might get a kakimoto regu 06&r cat back in the near future. I've heard they're pretty quiet, i still don't think it will beat 90bd though. Probably a bit cheaper than the $1500+ quote I got to make a custom 3 inch cat back that will flow well and meet EPA requirements.

Thanks anyway mate, but i kept the stock exhaust, so i'm gonna change it back on the weekend. I think I might get a kakimoto regu 06&r cat back in the near future. I've heard they're pretty quiet, i still don't think it will beat 90bd though. Probably a bit cheaper than the $1500+ quote I got to make a custom 3 inch cat back that will flow well and meet EPA requirements.

if your catback with a cannon on the end already has a proper mid muffler just get a new diff back system made up with a magnaflow 3" in/out 4"x11" oval by 14"body rear muffler. should be legal easily. stagea is 86db

The exhaust I have is a full 3 inch turbo back, with nothing but a hi flow cat, hot dog and a cannon lol. It's ridiculously loud, hence why I really need to change it. I'll change it back to stock for the EPA test and then look for something more suitable. Even if the exhaust was CLOSE to the 90db I would be happy. I've been doing some research, it looks like the Kakimoto o6&r might be a winner, or maybe the fujitsubo. Does anyone know of any other off the shelf cat backs that would be close to 90db?

The exhaust I have is a full 3 inch turbo back, with nothing but a hi flow cat, hot dog and a cannon lol. It's ridiculously loud, hence why I really need to change it. I'll change it back to stock for the EPA test and then look for something more suitable. Even if the exhaust was CLOSE to the 90db I would be happy. I've been doing some research, it looks like the Kakimoto o6&r might be a winner, or maybe the fujitsubo. Does anyone know of any other off the shelf cat backs that would be close to 90db?

I just bought a nice Kokimoto Jasma approved full stainless exhaust in excellent condition for $300, go to those places where they import cars, they're usually import these cars with those exhausts on and take them off once they compliance them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...