Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

A RB25 powered GTS4 circuit car running a .82a/r R595 - I didn't really mention that because the car does circuit racing, not time attack but actual laps and laps of racing on stock bottom end and 98 octane so I wasn't really squeezing out it's full flow potential on the dyno... everything was done to ensure he could rely on it for laps on end.   It made ~295kw @ hubs on 98 octane at around 16psi, hitting target by around 4000rpm.

Another was an R545 with a .82a/r housing on a Honda F20B engine (2litre twin cam VTEC, a bit like a destroked H22A) in a Honda Accord.  That only had ~540cc injectors so was not making big power either, but was making good boost by 4000rpm - again another one I never got specific on because the turbo clearly had plenty of flow to spare, the power figure (just over 200kw @ hubs on ~10psi) wasn't going to do it justice.

1 hour ago, Lithium said:

A RB25 powered GTS4 circuit car running a .82a/r R595 - I didn't really mention that because the car does circuit racing, not time attack but actual laps and laps of racing on stock bottom end and 98 octane so I wasn't really squeezing out it's full flow potential on the dyno... everything was done to ensure he could rely on it for laps on end.   It made ~295kw @ hubs on 98 octane at around 16psi, hitting target by around 4000rpm.

Another was an R545 with a .82a/r housing on a Honda F20B engine (2litre twin cam VTEC, a bit like a destroked H22A) in a Honda Accord.  That only had ~540cc injectors so was not making big power either, but was making good boost by 4000rpm - again another one I never got specific on because the turbo clearly had plenty of flow to spare, the power figure (just over 200kw @ hubs on ~10psi) wasn't going to do it justice.

thanks for the reply mate.  i was looking at either the r595 or r545 for an unopened sr on 98 with around 18-20psi down its throat.  i like the 59/59 r595 wheel match a bit better than the 54/59 r545, but it would be fairly laggy id imagine.  

4 minutes ago, bj0rn said:

thanks for the reply mate.  i was looking at either the r595 or r545 for an unopened sr on 98 with around 18-20psi down its throat.  i like the 59/59 r595 wheel match a bit better than the 54/59 r545, but it would be fairly laggy id imagine.  

What power are you aiming for, with what fuel etc?  Stock cams?   One of the things I tune has been running a Kinugawa TD05-16G6 with the 3" intake (TD06 style compressor) for the last few years - completely stock internals (including cams), and flex fuel on up to 20psi. Honestly, it is an amazing match imho.    I know it's not a Masterpower, but it works so well I don't know why you'd go for something different - especially if you are running with an external gate.  The thing can hit 20psi+ at around 3000rpm in higher gears, and has trapped at around 120mph in the 1/4 mile - is pretty rapid.

Edited by Lithium

as above,  around 18-98 on pump 98 fuel.  unopened so yeah stock cams.  e85 is only available at a couple pumps in perth so im not really looking to go down that route.  my old car did 119-120mph passes id be pretty happy with that haha.  350rwhp would be nice,  so whats that around 280rwkw or there abouts?  makes 270rwhp on a disco pot at the moment and 110mph. and yes will be external gate. 

6 minutes ago, bj0rn said:

as above,  around 18-98 on pump 98 fuel.  unopened so yeah stock cams.  e85 is only available at a couple pumps in perth so im not really looking to go down that route.  my old car did 119-120mph passes id be pretty happy with that haha.  350rwhp would be nice,  so whats that around 280rwkw or there abouts?  makes 270rwhp on a disco pot at the moment and 110mph. and yes will be external gate. 

Hang on - you are running a discopotato on 20psi already?   

I'm kind of inclined to think that there probably isn't a huge amount of point in upgrading the turbo and running 18-20psi without doing cams, the cams are potentially the limiting factor in your setup at the moment I'd have thought.    280kw @ wheels on 20psi with pump gas on stock cams sounds pretty optimistic, regardless of what turbo you use.

I guess I haven't had HEAPS to do with SR20s, but they seem like they aren't that great on stock cams - at least from what I've seen so far a GT3076R would be a waste as you'd make well short of what they are capable of on 20psi but get heaps more lag.   For what it's worth, even with the 16G on 20psi the turbo seems to have more flow available

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...