Jump to content
SAU Community

Easteren Fwy:trail Road - For Speed Cam?


Recommended Posts

Hey Guy,

Just a questions which I saw about 10min ago on eastern freeway...

just under Bullen Rd bridge - city bound I saw a sign with like camera with "Trail Road"...I donno if that's for bullen rd or eastern freeway

Are they start putting fix speed cam on eastern fwy now or what?? :rolleyes:

Cheers

Hey Guy,

Just a questions which I saw about 10min ago on eastern freeway...

just under Bullen Rd bridge - city bound I saw a sign with like camera with "Trail Road"...I donno if that's for bullen rd or eastern freeway

Are they start putting fix speed cam on eastern fwy now or what?? :rolleyes:

Cheers

question is was it on outbound or inbound lanes?

I was there about the same time you were, but probably earlier... did u see the cop car on the inbound lanes, facing the wrong direction on the centre median?

question is was it on outbound or inbound lanes?

I was there about the same time you were, but probably earlier... did u see the cop car on the inbound lanes, facing the wrong direction on the centre median?

I was going inbound, but I didnt see the cop...only saw 2 cars stopped under the bridge on the left hand side(not the centre median) of the road and thats where the sign i saw located....

yea, totally screwed hard for me too...like everyone else going at least 105+ all the time :rolleyes:

i always do 100 on eastern fwy, ive seen so many police on it, mainly in undercover cars

not just the eastern fwy but everywhere now, no one really sticks to the limit..

i will be sitting on the limit and get tailgated / see cars fly past me, honestly getting sick of seeing p platers flying past at stupid speeds, no wonder people are getting killed so often..

i always do 100 on eastern fwy, ive seen so many police on it, mainly in undercover cars

not just the eastern fwy but everywhere now, no one really sticks to the limit..

i will be sitting on the limit and get tailgated / see cars fly past me, honestly getting sick of seeing p platers flying past at stupid speeds, no wonder people are getting killed so often..

also spotting vicroad car often on freeway these days....especially during peak hr in the morning and they just getting smarta$$ driver on T2 lane without passenger~ :down: where i was going outboud with 110+ and same as other cars~which make us all going the same speed at 100~ :D

Hey Guy,

Just a questions which I saw about 10min ago on eastern freeway...

just under Bullen Rd bridge - city bound I saw a sign with like camera with "Trail Road"...I donno if that's for bullen rd or eastern freeway

Are they start putting fix speed cam on eastern fwy now or what?? :blush:

Cheers

I dont know about anyone else - but im struggling to work out what this post means exactly...

more clarification...

well the distance alot of cars travel behind each other on the freeway im sure is a factor in the ammount of crashes etc..

the inside lanes are notorious for dickheads!

yeah saw a guy get pulled over in the T2 lane for having a manikin in the passengers seat lmao was the funniest thing i have seen in years. Common guys i dont know why you would speed on the eastern freeway it is heavily monitored by undercover cops all the time.

AFAIK there aren't any speed cameras on the eastern until you hit Eastlink.

And from what i've heard they will never put fixed cameras on the Eastern FWY....don't ask me how i know this but i heard it from someone who works for a government official. Was part of some dealthey signed when they built the freeway.

If anyone can prove me wrong plz do cos i use the fwy at least 4 times a day going to Donny rd exit

I was on the eastern freeway a couple of months ago...what they were doing was, they had a police helicopter in the sky and undercover ford terrories on the freeway. I think the heli was using a rader to catch drivers out and the cop cars on the freeway chased them down. So Watchout!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...