Jump to content
SAU Community

Full Power Fc Tune For R33 Gtst Prices? Status, Recustoms?


Recommended Posts

hey guys just wondering where you guys got your power fcs tuned and are happy with the job and how much they charged , typical mods, turbo, fmic, z32, injectors,exhust, for example how much would somewhere like status or re customs charge?

it depends as the AFM and injectors may need more work to have them tune

and you should clarify what you call a "tune" as it might not be the same among tuners

some may just give you a max power tune and some may give you an on-road tune

and some may do a combination of both

if you just get a max power tune, youll likely have sucky fuel economy

so be sure that fuel economy is setup and tuned

and if its just a dyno tune, its likely when you get the car and trash the pants off it on the street, that it will knock

as the load is slightly different on the dyno, so either take note of this or enquire if an on-road check/tune is needed

my max power GTST tunes have been around $400 ish that was back in 2005/2006

and it was setup of car, max power tune, quick economy trim

more work was required to fix on-road knocking and on-road fuel economy later (these would be seperate costs i assume? - i did them myself)

got mine tuned at chasers motorworks (West melb, dynon Rd) . got 340kw at all 4 wheels really happy with the tune. chargers depends on how long Paul (Tuner) takes. chargers per hour. u can let him know what you want and he will work it out for ya :down: give them a ring or go down for a chat! friendly bunch of guys. who knows i might be there as well. haha. grey r32gtr, mension ken they shld know me. lol..

Edited by ujin

thanks guys yeah i was reading about the different type of tunes and how people are getting knocking on the street, thanks ujin ill have a chat to them when im ready for the tune .

It's all subjective in a lot of cases. People get quoted $500, and it turns out to be $1000.

So just go there, discuss with the people, get a price. If your car has issues on the dyno, price will go up, simple as that.

No-one can give you a concrete price due to potential problems (ie a fuel reg might die, fuel supply might be shit, parts might be intermittently faulty).

All of which takes time to diagnose and price - goes up. Hence the increase in costs.

Couldn't agree more Ash. I had issues with my fuel pump and had it replace with a Tomei @ Racepace when my retune was done because the first "cheaper" tune I has was rubbish.

Name: Racepace

Location: 9/6 Holloway Drive, Bayswater

Number: 9762 9421

Trent quoted me 550 I paid 550 although it went fairly smoothly at first he was worried if i had enough spark in my coil packs but he said they ended up being fine although I think he said he's bumping the price up to $570 for first tune now

thanks james yeah i heard the price went up just wasnt sure by how much i would be happy with that price for a good tune and happy to pay abit more if needs more attetnion

well status is $570 now as james was only there recently.....

but with trent, that $570 buys you a VERY good tune. and unlike many other tuners, he will fix up any issues that may arise on the road for free, and he then charges a lot less for subsequent retunes when you have new mods :(

i have my car tuned at status, and am very very happy with it... unopened rb25 makes 300rwkw and has been alive for nearly 2 years now

trent spends a LOT of time tuning every car, you really do get every dollars worth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...