Jump to content
SAU Community

Recommended Posts

Hey everyone, it's time for another meet and once again we're trying something a little different!

We're having a BBQ day down towards Cardinia Reservoir.

It's a BYO thing, so bring some meat/salad/whatever to share!

We'll meet at the Monash carpark (same place as the kebab meet for those that went) and cruise along Wellington Rd until we reach our destination.

It's not a very long cruise (about 30 min) so after the BBQ we may go for a cruise through the hills if people are interested.

Bit more of a social event this time but will still be a fun day.

Details are below. Hope to see a lot of people there!

When?

Sunday 6th of September.

Meeting at mid-day (12pm)

Where?

Meeting at Monash Uni, Clayton.

There is a multi-level carpark that can be seen from Wellington Rd. We will be on the ground level.

See map below.

Distance

Roughly 30km to the destination. Obviously for those doing the hill cruise afterwards there will be added mileage.

What to bring

- 1x jap import

- Something for the BBQ (list in this thread what you plan to bring so we get a variety)

- CB Radio (optional)

- Camera (optional)

Meet point:

monash.jpg

  • Replies 95
  • Created
  • Last Reply

Top Posters In This Topic

Yes we are :P

Probably wont have my car... its going in for some "minor" work :D

yeh i know about your minor work buddy, you spilled your beans at deca :D

does that mean the missus will drive her GTR then, hehe i might even come to this event in my Gazelle......maybe

yeh i know about your minor work buddy, you spilled your beans at deca :P

does that mean the missus will drive her GTR then, hehe i might even come to this event in my Gazelle......maybe

even if cr33m wasn't in for surgery the missus would still be driving her GTR :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...