Jump to content
SAU Community

Recommended Posts

firstly is the clock that sits under the tacho meant to be backlit (so when you turn on the lights you can see the time) - mine don't can i can never tell the time in the car :D

secondly the display for the climate control doesn't come on all the time (some time is displays, other times it won't.) Is there anything I can do to make it work all the time? (the a/c etc... works by the way).

Link to comment
https://www.sau.com.au/forums/topic/28452-r32-console-dash-question/
Share on other sites

should be back lit man... maybee i lightbulb back there's gone?

I have the same prob with my climate control, though i recently discoverd that when i leave it on (when display is not working) it comes into full display again after a while... Problem is my air-con doesn't work... think it need a re-gass... :D

The globes is pretty easy to remove, good luck trying to find a replacement globe, i would love to hear from anyone that knows where to get one.

And dont tell me Nissan, 2 x dealers have told me that the globe doesnt match up to any other Nissan globe from OZ delivered vehicles, so $45 and 2 week wait, and i have tried a few electronics places as well.

See here for white faces gauges, i think they are a pretty hard find for R32 GTSTs

As for the LEDs, pull out the globe and you will see why it will be difficult to do. The back af the gaug cluster is actually a printed circuit board to which the globe screws into.

Then there is the agro of ensuring the globe voltage suits the selected LED, can be made to work, but hpow much trouble are you willing to go to?

Im hoping there is a genius out there that knows where to get them for less then $45

Globes for the clock are a standard sort of globe (very thin version of those 'slide-in' types - in indicators, etc).

You just have to pull the instrument cluster out to get at them.

for the gauge cluster to come out

1. the panel under the dash has 8 screws 4 up near the top one in the left bottom corner 2 next to the bonnet release and one around the corner where the dash joins with the door.

2. now pull the steering wheel as far down as you can

the surround for the gauges (part with ur windscreen wiper switch, hazzards, lights ect) has 7 screws 3 at the bottom (these were covered by the panel that was just removed) then there are 2 on the underside of the middle part then there is one on the underside of the light switch and one on the underside of the wipes switch. the whole surround will come out in one peice

3. there are 4 screws that hold the cluster in 2 at the top and 2 at the bottom then it will slide out

4. the globes for the main back lights are 12v 5w wedge types they just twist out if you want to change the colour just buy the covers for the globes from repco or where eva

i have pics on how to do it but it wont let me upload :)

hope this helps though

Roy - I read that thread about the gauges and I'm a little iffy about it. Plus the it doesn't look that good. :)

2GU UP - thanks for the instructions. I try and have a crack at it this weekend. (If / when you can upload, the pics will be of great help!)

we have em at our servo i think most servos should have em as well as anywhere that sells NAVARA (i think thats the brand) globes

CerealKiller - ill email em to you if u like cause its still not letting me post em

Sorry to barge in on the thread, but with regards to the climate control display, what does the the AMB button do? It displays a temperature with some Jap writing next to it on mine for about 5 seconds. Does it tell u the current temperature inside or outside the car???

What is that chip looking thing on the dash towards the top near the windsreen? about the size of a 5-10c peice and its like a clear brown colour....

I also had to take my stereo out at one stage and saw a small vent near the bottom right hand side of the middle cluster (near where ur left knee sits) near the shifter. I couldnt figure out what it was. Is it a climate sensor??

i always wanted to know wat that lil chip thing on the dash is too

AMB is a rough temp outside the car

and the lil vent thing is a sensor fot the AC so it knows wat temp and speed to set to when the AC is in auto mode

when u pull out centre console and remove the climate control unit, u can get to the bulbs to replace, they are common to stop working after a while. i have done many of these but u cant get of the shelf type replacement bulbs, u need to do sum modifying. dicksmith sell globes(not LED's) which are 12v and very similar to the original. they are called wheat grain type globes.

the original bulbs come with long pins which wrap around the plastic screw peice, u need to get wheat grain globes with leads soldered on, trim the lead the same length and pull all the insulation off and stick it in.

most nissans have this system and its the same on the back lights for the dash aswell. things to note...wen u pull out the original globe it will have a rubbery blue coloured cover (so it lights up whitish rather then the yellow globe colour) be careful to pull this off in one peice and not rip it.

  • 1 month later...

Unwritten Law,

If this thread is still going, the AMB button is the Ambient outside temperture. The sensor for this is located between your radiator and your intercooler next to the horn i think. it's a black square box.

The "Chip" is a sunload sensor. detects how hot the sun is and adjusts climate control to suit. More sun = more cooling etc.

The vent near you stereo is a temperature sensor for the car cabin temperature.

All these determine what your climate control does.

Richy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...