Jump to content
SAU Community

Recommended Posts

Hey guys, drove around today with no problems, but on my way back home, sounded initially like i had a flat tire, then realized was the engine.

Car sounds like a wrx (which isn't normal lol), if i'm rolling along, the engine will stutter, especially when accelerating. When travelling along, the engine will slow down then burst forward for a sec, then back down etc.

Got a booking fr Trojan on Thursday, but its a 40-50 min drive from my place, and seemed to be getting worse on the 10 min drive to my place.

Any idea what it could be? Just wondering if I should drive it on Thursday, or get it looked at by someplace close perhaps tomorrow or tuesday first.

The only weird thing I can think that happened, was yesterday, my nan was watering the garden and somehow lost the hose, went under the car and drenched the engine bay from underneath. I noticed the pod filter was a bit wet but left it overnight/day to dry and like i said, it ran fine......

If you haven't guessed, i know next to nothing about this stuff...

Link to comment
https://www.sau.com.au/forums/topic/284648-engine-stuttering/
Share on other sites

If your pod filter's wet then it's very likely that you've gotten your airflow meter wet. Could be that. It could also be the electrical contact for the crank angle sensor has gotten wet, which isn't far from the air filter.

Could be your coilpacks starting to bomb out by coincidence, but that only really happens when you rev/boost it hard and flat footed (initially).

Does it matter if the engine's warm or not?

Thanks mate,

Nah dosn't matter if the engine is warm, drove home which was like 15-20 min drive, did it the whole way

Should mention that my engine is stock. just got the pod and zorst.

Edited by 33Sedan

my silvia (RB20) sounded like a wrx when running on 5 cylinders on idle but as soon as you started driving itd run on 6 cyls. possibly coils. just get some splitfires and see what happens.

could it be the spark plugs not firing right

I'm not sure, that was my initial thoughts. Hmmmm...... Might drive it to my local place, see whats wrong, if they gotta replace stuff i would prefer trojan to do it - except not really wanting to drive it all the way there lol.

.......or depending if you can get it to do it at idle

easy way to test the coils is by unplugging them one at a time. whichever one doesn't make a difference.... will have some issue with it.

man i had the exactly same issues here. my RB25de Neo have some trouble with missfiring. because it sounds like a WRX. probably chilling winter in canberra?

if u start the car in the morning (or when the engine is cold) it sounds ok for 5 minutes (because the car automatically retard the firing). after 5 mins the timing gets advanced to normal state, thats when the engine sounds like WRX.

i'm opening my intake plenum now and will open the cover tomorrow to check and replace the spark plugs / coils / looms. or even injectors.

http://www.skylinesaustralia.com/forums/Ne...49#entry4774549

if u'll bring it to local workshop, will u share the answers with me?

cheers.

.......or depending if you can get it to do it at idle

easy way to test the coils is by unplugging them one at a time. whichever one doesn't make a difference.... will have some issue with it.

One thing he's forgotten to tell you though don't unplug them/plug them in while the car's running... right James? :D

OMG TOOK THE SPARK PLUGS OUT WHILE IT WAS RUNNING AND THE ENGINE WON"T START NOW>.......

just kidding ;-)

Thanks guys, getting it towed to trojan tomorrow. gtrkat, your price was spot on! Thanks!

Trojan thinks it could be the spark plugs or coil packs ;-)

Will see on wed/thurs. Hopefully won't break my bank account...fingers crossed!

Good luck mate, i had an issue with mine not long ago where it would just stop accelerating all together, then it'd kick back in and cut back out, all within the space of a few seconds. Took it to Ed at AutoTech and it turned out to be the solder on the wires in the AFM had come loose and were barely making contact causing the PowerFC to think there was no airflow coming in and cutting the power. To make matters worse had a grounding issue at the same time and one problem masked the other.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...