Jump to content
SAU Community

Recommended Posts

This is an EOI, I only just had the car built, its just about to tick over on its 1000km service. And as with most long car builds. by the time i finally got it back on the road I realized I'm just not into fast cars anymore..

I will consider a trade for a nice van, preferably with more than 2 seats as I still wanna be able to car pool in it aswell as throw my tools in it for work.. Im an electrician by trade so I need a van.

Asking Price: $15000

Killometer's: 70,000 on the clock

Manual or Automatic transmission: Manual

Engine Type: RB25DET

Modifications:

Freshly built forged rb25 with Arias forged pistons, Arp head studs etc.

GcG highflow turbo

Original Hybrid GT spec intercooler (Not a copy)

Apexi Super induction POD filter

Turbo Timer

Aftermarket fuel pressure reg

full 3 inch turbo back exhaust system with CES dump-pipe and Hi-flow cat, 5' tip.

Wolf 3d ECU

GTR injectors flowed and tested sitting in an after market fuel rail to suit rb25

Wallbro 500hp fuel pump

Catch can

Pager Alarm with remote start

Aftermarket suspension (not sure what brand but rides nicely, not too stiff)

17x9 and 17x8 avs model 5's recently sprayed in black.

New alternator

New battery

New waterpump

Interior

Clarion 4x50 watt headunit

6' splits in the front

6' speakers in the rear

2x JL audio subs in custom boot install

Interior is in great condition except for passanger seat has a rip in the melways holder and center dash air con vent is broken.

Registration:Rego till Jan 2010

Crash History: No Accident History

Other Comment's about the vehicle:

I Bought the car stock in 2005, Im first australian owner. All work has been done by Sabbadin automotive including close to $20k in reciepts. Car is currently making 220 rwkw, once run in and boosted it should make anyway between 240 - 260rwkw with this setup. In closing I f**king love this car, but I just don't think i have room in my life to keep a quick car anymore, tastes change I guess.

Contact detail's - VIA PM or in the Thread my number.

Not the most flattering picks but gives you an idea of the car..

skyline1r.jpg

skyline4.jpg

skyline3t.jpg

skyline2h.jpg

smallzou7473ur2.jpg

smallimg0641fg9.jpg

Please no test pilots or tire kickers, and Im not desperate to sell so no low ball offers either, too much money has gone into this car to just throw it away so only reasonable offers will be considered.

Thank you.

Edited by Lukaz

Forgot to mention it also has

Brand new excedy heavy duty clutch

New flywheel

Splitfire coilpacks

And comes with a spare set of 4x r32 gtst wheels with tires.

All reasonable offers considered, and trades also considered altho NOT for any modified cars please. Maybe after a wagon, sedan or van of some sorts.

Thanks all.

That would mean it would need a full inspection if I tried to transfer the rego to another state, and then when they see the engine number doesn't match up would need to be engineered yes?

Either way sweet ride, exactly what I am after, would be very interested if there was a no fuss way to transfer the rego to SA without the possibility of a defect or requiring to be engineered.

Edited by Rolls

If this beast has not been taken by end of next month considered it sold mate, pretty sure nothing can go wrong with motor being forged!

If this beast has not been taken by end of next month considered it sold mate, pretty sure nothing can go wrong with motor being forged!

Thanks mate, and all work completed by a very reputable melbourne workshop. The motor and head have both been basically rebuilt top to bottom, I will have to go thru the reciepts but im pretty theres around $1100 worth of work in the head alone. Let alone aprox $5k worth of work done to the bottom end. The car is insanely quiet and smooth and power delivery is amazing, a very good job by rob sabbadin.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...