Jump to content
SAU Community

Recommended Posts

Morning,

yesterday afternoon i put down a deposit on a n/a r34...couple of questions.

1) the blue plate under the hood/drivers side was etched in...i know if its engraved it means its most likly stolen...but i know etching is different, should i be worried?

2) it has not been regerstered in australia before and its going to be put straight into my name...again...suss???

Overall the car is in good condition, few dints, scratches, but mechanicly it goes great...60,000kms on odo

Im getting a comprahensive inspection tomorrow, where the tester goes to his home. then the car is getting complied, then rwc, then rego...he is doing the compliance, rwc and rego

he seemed like a nice enough guy, seems to import a lot of cars (he had another r34 and a toyota chaser at his house for sale), but you cant be to careful, ya know?

if anyone wants to give anymore information, it would be great!

Im buying through a private sale.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/286178-so-i-just-put-a-deposit-down/
Share on other sites

This isn't that f***ing car that keeps getting advertised here every few months in attempt to pawn it off on some other sucker is it? Researching now...

EDIT: Different colour it seems, but could have been resprayed? I dunno, it just sounds a bit suss that he won't comply it before selling. See these threads for why I jumped to this assumption:

http://www.skylinesaustralia.com/forums/Il...lp-t247731.html

http://www.skylinesaustralia.com/forums/R3...50#entry4637150

its a white 2 door 34 w/ sunroof.

he is complying before sale, along with 12 mnths reho and rwc, it arrived in australia couple of days back, so obviously hasnt had time to be complied, all he has atm is a deposit.

hope that makes more sense

Morning,

yesterday afternoon i put down a deposit on a n/a r34...couple of questions.

1) the blue plate under the hood/drivers side was etched in...i know if its engraved it means its most likly stolen...but i know etching is different, should i be worried?

2) it has not been regerstered in australia before and its going to be put straight into my name...again...suss???

3) Overall the car is in good condition, few dints, scratches, but mechanicly it goes great...60,000kms on odo

4) Im getting a comprahensive inspection tomorrow

5) he seemed like a nice enough guy

Cheers.

1) What do you mean by etched?

2) I was the first to register my car in AUS

3) I'd call BS on the 60,000K's

4) Good on you, who from?

5) Usually the guys trying to screw you over are the nicest, the guys who want the money for their pride and joy drive a hard sale

1) hmm...best way to describe etched...um...the plate is NOT smooth, you can feel the writing..if that makes sense....my dad told me its just the tool they use on all of them, its not engraved as there is NO depth.

2) i also know that the 60,000 is probally bs...BUT i must say that car runs VERY tight.

3) StateRoads is doing the inspection.

4) the guy regulary imports cars, so he after a easy sale, he does seem legit, he was offering information without us asking him...a good sign imo

Dont know what else to say bro, looks like your taking all the right channels, if it looks clean and drives clean then your probably aright, good job with StateRoads tho they do top quality work

EDIT: Out of curiosity whats this guys name? Just curious cause he might be the same guy that did my car

cheers mate, i mean, there are a couple of minor dents, scratches on it...but nothing bad...stateroads is actually doing check today at 2pm so they will tell me what i gotta know. :(

EDIT: the guy's name is Roy...cant remember the surname...car is in Fawkner

Cheers for ya help and advice mate...the compliance and rwc will not be done before inspection, obviously, so hopefully most of the things stateroads pick up will hopefully be done during compliance and rwc.

random question: the xenon lights in the 34's, are they changed for compliance??

its a white 2 door 34 w/ sunroof.

he is complying before sale, along with 12 mnths reho and rwc, it arrived in australia couple of days back, so obviously hasnt had time to be complied, all he has atm is a deposit.

hope that makes more sense

Sorry I misread your first post. In that case it does sound legit.

I wouldn't put it past a 34 having only 60,000km on the clock, particularly if it's a fresh import...my R33 still has only 98,000 and the engine feels too fresh to be anything more than that.

Cheers for ya help and advice mate...the compliance and rwc will not be done before inspection, obviously, so hopefully most of the things stateroads pick up will hopefully be done during compliance and rwc.

random question: the xenon lights in the 34's, are they changed for compliance??

I'm pretty sure only GTR's come with stock Xenon lights so having Xenon's in yours wont pass, but hopefully they wont notice

take a photo of the blue plate and post it up. someone can enter it into FAST and tell you the original details of the car if you have the VIN/chassis number and model code.

Good Idea Matt, wish I thought of that sooner

I've imported 2 cars. The car is always registered in your name since you are the first Australian owner. The only other case would be if purchased the car from a dealer who had already complied and then registered the car for sale. You'd then need to transfer the rego like a normal re-registered car.

Yours sounds a little odd though considering this is a private sale yeah?

With regards to the compliance plate these are usually quite clean and etched light, if it looks like it's been tampered with then that's sus. You should also find the new VIN etc engraved into the cars firewall or wheel arch near the suspension mounting point with the plate. The numbers should match and they should also match the cars original VIN but will be longer.

If you can get a pic of the plate post it up. Should look similar to this plate but will be blue as you said. It should have the details of the compliance agent and the approval number which you can check with the appropriate body.

IMG_7130.JPG

You can also request a copy of the import approval and compliance paper work from the compliance agent. I have copies of mine if you need to take a look just PM me.

thanks for your responces guys, wont be able to get a pic for a while, the build plates are etched in, so no issue with the build plate...i now know what i needeed too know :(

also, stateroads are doing the inspetcion as we speak, so ill have the report by tonight hopefully!

wish me luck...lol..honestly though, the car seems in good nick and as i said, runs very tightly and smoothly

ill let u all know how the inspection report goes!

WRT the blue nissan build plate - the plate in my 33 GTR is smooth. i feel no difference in texture beneath my fingertips at all - as if it has nothing marked on it.

Dunno bout 34s - the new VIN is generally engraved into the strut tower on 33s after compliance.

And James is correct to the best of my knowledge...they may have to take em out, not sure if they can get around it. If not - just put em back in yourself after RWC :(

Yeah, with the xenons, with a proper compliance job, they'd have to take it out, but some people won't bother with it, so just in case, take it out yourself before the compliance and like Kamikazeninja said, put them back in afterwards. But apparently, some people take the xenons out and they even modify the back of the headlights so you can't put the xenons back in.

But at the end of the day, the R34 factory xenons are illegal and my mate was driving a NA R34 on his P's and a cop dicked him for the lights, because they couldn't find anything else that was wrong with the car lol :D

Just wondering...is the deposit refundable? Because I woulda thought that you should get the car checked by a mechanic before you put a deposit down?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...