Jump to content
SAU Community

Is This Quote About Right?

Projectile

By Projectile,
in General Maintenance

 Share

Recommended Posts

Projectile Collaborator

Projectile

Posted
Posted

Hey guys,

My Timing belt is making a whining noise and i want to know if it is something to worry about? It's sitting at ~140,000km now and has had the noise since when i first got it ~126,000km. I have proof of the 100,000km major service done at Giant Nissan in Wangara (Perth) so i know it wasn't just said by the previous owner. The noise only occurs within the first ~20 seconds of starting the car and i haven't noticed it at any other times.

I took it to my mate today at auto masters who quoted me $800 cash job to service it and do a 'rebuild' to an extent on the timing belt which meant all new seals and bearings and belt etc... which he said cost ~$300 for the 'timing belt kit' and then the water pump ~$100, a Full service on it (oil filter, oil etc...) and the labour, he was confident it would get rid of the noise and was worried that it might give at any moment because he cannot see the belts without taking the cover off and all that...

Does anyone get this noise? Is it something i should be getting fixed or a common problem not to worry about? I know that if the belt snaps or slips my piston will smash the valves and cause a few grand in damage, correct?

Cheers all,

Jacob.

Link to comment
https://www.sau.com.au/forums/topic/286921-is-this-quote-about-right/
Share on other sites
Projectile Collaborator

Projectile

Posted
  • Author
Posted

yeah well the only difference is i don't get a auto masters reciept, i only get parts reciepts for warrenty and yarda yarda.

Know much about this problem though? Do you know if it is even a problem or just a common noise which doesn't hurt anything? The whining coming from the timing belt cover at the top in front of the cams.

PIOTREK Proficient

PIOTREK

Posted
Posted

mate make sure that u r sure that its the timing belt! it could be a number of things, my mate had the a simular problem execpt it would be noisy all the time. Turned out to be the trust bearing lol (not sayin u as bright as him though).

Another mate had a racing timing belt and it was just always noisy! But considering that it only happens for the first 20 sec of driving i would say its not the timing belt (at most it could be a tention issue).

Next time drive the car and its really hot turn it off and turn it straight one, does it still make the noise? i know my friend had an air con compressor issue in his car, it make like 20 sec worth of really had noise and then goes away (its really loud!!!)

Projectile Collaborator

Projectile

Posted
  • Author
Posted

i know it is under the timing belt cover for sure because when i start the car and put my hand on the casing of the timing belt it is making the noise and vibrating to an extent, more like a rubbing noise but still whining, nothing from the belts or compressor.

The date of the 'major service' which included timing belt and water pump at 106420km was done 10/04/2006, so 3+ years ago... this was done before i owned the car. The spark plugs were changed then along with bunch of other things. This is the 100,000km service yeah?

The belt was later found to be noisey and once looked into was found to be too tight, doesn't say if it was fixed or what happened.

I think because it is 3+ years ago i should be spending the cash and getting it done now to save the hassle. My mate has guaranteed the noise will be gone and this will also include at idle, first switched on and running. Also it's getting a general service and a full engine bay clean to make it look prettier. haha. Going in on thursday...

Anyone disagree? Please i want to hear it if you have a good reason :(

Cheers all.

Moodles2 Grand Master

Moodles2

Posted
Posted
i know it is under the timing belt cover for sure because when i start the car and put my hand on the casing of the timing belt it is making the noise and vibrating to an extent, more like a rubbing noise but still whining, nothing from the belts or compressor.

I had that exact same symptoms afew months ago, it was my crank angle sensor making the noise because of the clear timing cover I put on, the CAS was alot more forward thus putting more load on the CAS drive key itself..

Projectile Collaborator

Projectile

Posted
  • Author
Posted
I had that exact same symptoms afew months ago, it was my crank angle sensor making the noise because of the clear timing cover I put on, the CAS was alot more forward thus putting more load on the CAS drive key itself..

hmm ill have a word to them today when i drop it in and let them know cheers guys

  • 6 months later...
Cadavre Enthusiast

Cadavre

Posted
Posted (edited)

It could also be a bent timing gear making the belt rub on the casing, saw that once, someone had tried to stop the pulleys moving by jamming something in there. Or a stuffed tensioner bearing its not unheard of having one of those noisy from new. Price sounds good to me it is a bit of work.

EDIT - just realised how old this post is!

Edited by Cadavre

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...