Jump to content
SAU Community

Recommended Posts

Okaly Dokily.

Both AFM's totally replaced and the issue still appears to be occurring.

AFM wiring has copped a prod and a poke, even during one of it's hissy fits, and it didn't seem to make any difference.

Anyone else got any ideas, or will this remain 'The Mother Of All Unfixable Problems'? (:whistling:)

Edited by DarkGT-R

have you checked 110% via fault codes that it's no doing it?

Blitz ECU makes it hard, does it even show fault codes?

A PFC you can tell in 2 seconds :)

I'd say CAS next - but ONLY after you check the fault/ecu code somehow

take out your battery, drain the liquid, fill with new de-mineralised water, charge overnight, give it a go.

ask around your area for a consult port (or buy one, Nissan Consult for $50~) plug into car (behind coin box next to fuses near right knee) & laptop and read whats going on with your ecu

after that, dynotune might we a way to find the issue.

one coilpack could be failing?

take out your battery, drain the liquid, fill with new de-mineralised water, charge overnight, give it a go.

ask around your area for a consult port (or buy one, Nissan Consult for $50~) plug into car (behind coin box next to fuses near right knee) & laptop and read whats going on with your ecu

after that, dynotune might we a way to find the issue.

one coilpack could be failing?

So you want to turn a lead/acid battery into a lead/water not battery??!! WTF?

Can you confirm that Blitz ECUs also run the Consult protocol?

take out your battery, drain the liquid, fill with new de-mineralised water, charge overnight, give it a go.

ask around your area for a consult port (or buy one, Nissan Consult for $50~) plug into car (behind coin box next to fuses near right knee) & laptop and read whats going on with your ecu

after that, dynotune might we a way to find the issue.

one coilpack could be failing?

I believe the test with the consult port may have already been done yesterday by the shop working on the car. At one point they hooked up a small rectangular box with various readouts on it to the ECU. Everything appeared fine. No error codes displayed, even when the issue occurred.

you did not mention your BOV.. Ive read others having probs like yours after going aftermarket( leaking at low revs and idle)..at least it would be easy to test

Anything not mentioned will be standard.

My car still has the standard BOV in place.

Would a smoke leak test confirm if the BOV was leaking? If so, then this has been checked.

Edited by DarkGT-R

its obviously something thats been bumped during the airfilter instalation.

im one for a dicky conection to the airflow meters..

simple to see if its the filter, just remove it and see what happens.

try to think what was touched duing the filter install..

its obviously something thats been bumped during the airfilter instalation.

im one for a dicky conection to the airflow meters..

simple to see if its the filter, just remove it and see what happens.

try to think what was touched duing the filter install..

Yeah, wiring and connections may be the next direction to look.

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...