Jump to content
SAU Community

Recommended Posts

hi all, im currently rebuilding my spare engine at my garage.

ATM, looking for a good & cheap :) shop in canberra to:

- shot peened my gtr rods & freshen up the rod stud bores.

- decked bottom end surface (before putting head gasket)

- freshen up the bore before putting new studs.

- balanced my crankshaft

and how much $$ im going to spend each?

i'm not looking for a cryogenic cranks etc, just to do basic rebuild stuff.

and lastly, does anyone have any prev exp for tuning pfc in canberra? i know lots of famous one in sydney but i wont be able to drive it to sydney.

thanks.

Link to comment
https://www.sau.com.au/forums/topic/287706-what-shops-to-go-rebuilding-my-neo/
Share on other sites

Oh he wants the work done.....I thought he had it done and wanted a rebuild. Present and past tense ing vs ed, so yeah pro engines for any machining etc

Plus it still stands for pfc anyway.

No PM's from me, It's a waste of breath and as correctly pointed out each persons experience is different.

Slaughter - Ditto mate, I have experienced the same pain on a rebuild. Take solace in my sig.

I've been burnt by Autotech. >.< Shame because Ed and the others there are great guys.

Plus, I don't think they are cheap.

For mechanical I'll be taking mine to TopSpec in Hume.

I haven't had anything 'big' done with him, but he's been great for the things I have had done there and all for a good price.

Also, girlfriends dad takes all his business cars there and recommends him.

Meh, every shop has bad feedback. I wont name them but I have had work done at a particular shop and was totally shocked at the price tag but they did do good work. Some times you luck out some times you don't

just got quote from proengines.

Just sharing for reference on machining cost for RB25det:

shot peen conrod $120

close & grind conrod $132

mill 6 cyl block - trade $100

machine hone 6 cyl $100

machine + fit crank collar $300

balance 6 cyl $225

check size & polish 6 cyl crank - trade $80

chemical clean 6 cyl $135

can upload the pdf if u want.

some questions:

what is mill 6 cyl block - trade? is it shut & grind new main stud hole?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...