Jump to content
SAU Community

Recommended Posts

folks,

R1R.1.jpg

just a quick thumbs up for the aforementioned tyre. i've had them on the vehicle for about 5,000km's with 2 trackdays and they are holding up extremely well, i predict them getting to 15,000km's without any drama's. I have 17inch all round, 255/40 on the rear, 235/45 on the front. Suspension setup helps alot though, i have Whiteline swaybars, camber & castor kits aswell as a rear diff brace.

In the Wet:

fantastic - you can easily light up the rear's but i put that down to a function of high powered rear wheel drive rather than lack of grip. Put it into a corner and it turns without understeer, maybe a touch of oversteer. With traction control on, its like driving a AWD - it has that much grip. In heavy rain i have never experienced aqua planing, water just washes off them...

In the dry:

sublime - grip when you need it without squeel or road noise! i am absolutely dumbfounded by the amount of road noise these tyres produce - practically none! for its soft compound nature, the road noise of these tyres are amazing! tyre wear is also impressing me especially after 2 trackdays and 5,000km's.

On the track:

utopia - im sure an Rspec tyre will have alot more grip but for the money i paid you just can't go wrong. just after the suspension was installed i had the tyres put on aswell. on the first trip down the car was terrible, i was understeering all over the place. dropped the tyre pressures on the front and it pulled it back in a little but it still had excessive understeer. on my return trip i tweaked the rear sway bar to its hardest settings and played with tyre pressures till i had the car almost the way i want it. it still has some understeer but the its more nuetral than anything. thumbs up.

they come highly recommended and i will definately be getting them again pending its tyre wear...as i said i've only ran them for 5,000km's i'll have to report back how much i actually get out of them - perhaps in a year or so then i guess :cheers:

price?

~$1300 fitted & balanced for all 4.

Yep - concur fully!

I had Trampios on my car when I bought it - everything you say.

I didn't replace them because they wore too quickly on the inside and outside, but this turned out to be worn bushes on the upper control arms. I went for Firestones instead and while I don't have any complaints about them either, I seem to remember that the Toyo's gave noticably better grip and especially feedback.

so how much each? about $250 ?  

thats hella cheap for 2x 255s and 2x 235s fitted!  

need new tyres in the next week, wheres somewhere to get them in brisbane?

Hornibrook Motorsport sells them. He was handing out flyers last time out at Queensland Raceway. His business is pretty new so he would probably do you a good deal. I am going to give him a call when I next need tyres, he speciality is R-spec tyres so he seems to know his stuff. He is a mad keen motorkana man too so he speaks from experience. Unit 1, 5 Basalt St Geebung. 07 38651072. Let us know how you get along, like I said haven't bought anything off him yet, haven't needed to, but he seemed good.

buzz, great to see someone else using them, you mentioned that you bought the car with them on, do you have a rough estimate as to how many km's you put on them before they had to be replaced and how much tread, % wise, was on them when you bought the car?

rob, no probs. hope they impress you as much as they've impressed me!

knore, unsure of availability in brisbane, i would say goto your local and see if they can order them in at worst case? price was $300 for fronts, $350 for rears - they'll usually help you out on installation costs if you buy the whole set ...

  • 7 months later...

Any ideas why Toyo's australiab web site says they are only avaliable in a 215/45 17" or a 205/50 16" ? Are you sure you got a 255 in a R1R and not the RA1? I rang a toyo dealer and they say only RA1's are in 255/40 17"

Comments?

Ok I rang stuckey tyres and they say they have a 255/40 17" in R1R's. The Toyo web site must be old. The price was $519 each! where did you get yours from? Cause if I could get $350 for 255/40 17" I would buy them now.

Yeah tell me about it... I've been trying to get something going for about two months thou.

Firstly the budget simply doesn't stretch to $520 a tyre. Everywhere I rang for the Toyo's said 500 - 520. The Bridgestone RE55 are not going to be in for at least another fortnight. (Have been calling the guy for months to keep checkin') The Falken's are in shortage due to a fire in Japan or some shit like that. No one's got any of them!!

You got any other suggestions for me?

Here is my research so far. Based on a 255/40 17", per tyre.

Falken Azenis ST115 - $320 - No stock

Falken Azenis RT215 - $340 - No stock

Toyo Trampios R1R - $519 - Avaliable

Toyo Proxies RA1 - $460 - Avaliable

Yokohama A048 - $520 - Avaliable

Yokohama A032 - $548 - Avaliable

Bridgestone RE55 - $400 - In a container at customs

Dunlop DJ01 - $521 - Avaliable

Scotsman, there is a place here in Adelaide that does RE55S 235/45/17 for around 350 each fitted, Not sure about 255/40/17. If I go to R rubber on the rear again, I will be going 235 in the RE55S, as they seem to be damn near the same width as the 255/40/17. They are wider than the RE540 in the same size anyways.

if you like I can get his number and he can send some over. They told me they send them over pretty regularly.

Yep, that's Kym at Magill.

The inside of the tyres arent holding up so well with only 2 deg camber - but the rest is good - excellent grip and great handling. Heaps of tread on the outside, so it looks ok:p

Havent measured them exactly - but they sit wide on the 8" rim up front, wider than the rim slightly - lucky it has such a stiff sidewall. I might take to em with a tape measure tonight:)

One day late but here nonetheless:

Trampios R1R 255/40 x 17 = $350 a corner.

235's and 245's are low in stock.

limited supplies till further notice, so place your orders.

email me.

i can also get Dunlop R Specs, just confirming on price and tread pattern.

shipping to melbourne can be organised.

Franks,

Thanks for you efforts. But since I need them on the car today or tomorrow I will have to go with something local.

I will keep these in mind for next time thou, as I would have gone for this if I had more time.

Is this a special price for you, or can I contact this dealer myself when the time comes for more rubber? Who is this through? "Kym at Magill" I assume?

Thanks again.

So these grip really well in dry?

Im after a soft compound tyre that really GRIPS in the dry

I was leaning towards Falken RT215s, i know u havent used these, but how do u think they'd compare?

They are both about same price, from looking at the grip, the toyos are semi-slicks yes?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...