Jump to content
SAU Community

Recommended Posts

Hey all, does anyone happen to know if the R33 RB25 throttle body is the same bolt pattern as the neo 25? Im looking at ditching the TCS throttle body and want something else that bolts in place.

I know RB20 isnt the same as i have a spare one lying around and compared that.

any help would be appreciated.

RB20 TB with neo gasket

image0399.jpg

RB20 and RB25 neo TB

image0400.jpg

Link to comment
https://www.sau.com.au/forums/topic/288074-rb25-and-neo-throttlebodies/
Share on other sites

  • 3 weeks later...
just pull the tcs butterfly out if thats your concern :cool:

I take it the tcs butterfly is controlled by the ecu, and when it detects a loss of traction it closes the butterfly a bit to reduce power?

Does any one know how fast it operates or how much it closes the throttle body off?

rs four stagea throttle body is ugly as f**k because its the same body but has a stupid cover over where the motor should be. i hate it

want a rb25det one . but then dunno if the j pipe fits so meh

Edited by lachlanw

when i removed the TCS throttle body i used R33 RB25, but had to change the TPS over from memory, i think i had to block off a vacuum line off on the r33 throttle body also. and use the R33 cross-over pipe over the covers.

Cheers

  • 5 years later...

Thread dig... Can i remove the TCS butterfly (2 screws) with no ill effects to the ECU? I have the TCS auto turn off each time anyway, but don't want the system to throw a code. Can't imagine it would, but just wanted to check!

Absolutely. There was actually a recent thread on this very question.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...