Jump to content
SAU Community

Recommended Posts

If you change your mind.

I have hks2530s on a stock manifold and im upgrading to a motec m800 and im looking for the hardpipe kit from turbo to airfilters off the turbos.

Do the turbos sit in the same place as a stock manifold would? i have mines stainless dump pipes off the turbos to a split veilside 2.5 inch front pipes to cat.

Intrested in the manifolds and hard pipes to turbos afmless.

Did you mount your bovs turbo side or use the stock pipe work and placement of the gtr bovs.

Let me know either way mate id even be intrested in a trade of stock manifolds/heatshields if you wanted to do it that ways plus cash your way.

Edited by Gtir-keiron
If you change your mind.

I have hks2530s on a stock manifold and im upgrading to a motec m800 and im looking for the hardpipe kit from turbo to airfilters off the turbos.

Do the turbos sit in the same place as a stock manifold would? i have mines stainless dump pipes off the turbos to a split veilside 2.5 inch front pipes to cat.

Intrested in the manifolds and hard pipes to turbos afmless.

Did you mount your bovs turbo side or use the stock pipe work and placement of the gtr bovs.

Let me know either way mate id even be intrested in a trade of stock manifolds/heatshields if you wanted to do it that ways plus cash your way.

hey mate, nah im not gona seperate the manifolds, ive already got buyers for for the turbos, hard pipe kit, dumps and front pipe.

i just gota wait till i pick them up during the week and meet up with all the buyers. if anything changes ill be in touch but everything seems to be gone atm

hey mate, nah im not gona seperate the manifolds, ive already got buyers for for the turbos, hard pipe kit, dumps and front pipe.

i just gota wait till i pick them up during the week and meet up with all the buyers. if anything changes ill be in touch but everything seems to be gone atm

Did this stuff sell mate im still keen as bro.

Just pulled my motor out for a clean up of the engine bay.

Let me know mate

!!!!!!!!!!!!!!!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...