Jump to content
SAU Community

Recommended Posts

Has anyone used a os giken cross gear set? What exactly is it? Is it straight cut or helical? I'm just lookin to put together a gtr and need something reliable and consistent enough to drag race with high hp numbers without dropping $16,000 of rip off to transfer the power.

Link to comment
https://www.sau.com.au/forums/topic/288379-os-giken-cross-gear-set/
Share on other sites

hellical cut gears with slightly more agressive (straighter) angle. and it's still synchro engagement (in fact still uses the factory synchros). they are quite good but like all boxes not indestructible.

I have both Trust dog and 2 os giken boxes. Both are excellent, but trust dog is a pain in slow street traffic. I had an OS box behind my R32 until I spun a big end bearing recently at 9300 and 550kw at wheels, so I am putting the dog box back in with new motor. I couldn't change gears at 9000 on the strip being a synchro box. If your dragging with serious power a dog box is the only option I'm afraid.

I will have an OS for sale soon though as I'm going back to a stock rebuilt box in my 330kw R33 which is running my other OS box. I don't think at that power I need an OS box in it. I'll be keeping one spare though just in case I stop dragging the R32 and want to drive in the street.

I run stock 5th's in both OS boxes too as I think the OS 5th's are too short for a street car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...