Jump to content
SAU Community

What Should I Be Paying For An Rb25det Conversion Into An R32gtst ?

Visionaree

By Visionaree,
in Engines & Forced Induction

 Share

Recommended Posts

Visionaree Explorer

Visionaree

Posted
Posted

Hey guys unfortunately I'm finding out more and more wrong with this R32 that i bought last week lol i was really stupid to not try and find someone that knows what there looking for (bad things)

in a car before i bought it. but yeah im curious weather i should stick the the RB20 (146.000K) and fix the leak the turbo has. or totally convert it to the Rb25 because i only want to make the power that the 25 has out of my 20. so.. i dont know?? could any one help ? :( is is worth the money fixing the 20 rather than replacing it? i dont really even know if the turbo is leaking all im getting that from is from when my foot is flat from 2000rpm to 4000 boost hits what its suposed to wich is 12 or 13 on the guage but after 4000 it drops down slowly to 10 and then 8. ?? is that a leak?

cln Proficient

cln

Posted
Posted

payed 3 for my motor, 1.5 for the gearbox and ~1k labour, i could have gotten it cheaper but i bought the motor/gearbox seperately. If you are going to do the conversion make sure you do it all together, i did the motor first then the gearbox abit down the track because i didnt have the patience to save and do it all at once. payed the price and got stung 1k labour each time

GTR-32U Mentor

GTR-32U

Posted
Posted

what is this leak ? It isnt leaking oil by what I gather rather your boost is dropping off. what boost controller are you running ? What turbo is on it ?

Visionaree Explorer

Visionaree

Posted
  • Author
Posted
what is this leak ? It isnt leaking oil by what I gather rather your boost is dropping off. what boost controller are you running ? What turbo is on it ?

im really new to the turbo import scene sorry... im not exactly sure what it is but when i accelerate foot flat from 1800rpm to 4500rpm boost hits and stays at 13 but then after 4500 it creeps down to about 8. my boost controller is a manual twist top type. should i maybe adjust it down ? its only a stock turbo with stock cooler.

Visionaree Explorer

Visionaree

Posted
  • Author
Posted
Just because there is a bit of leaky oil you wanna change out the motor?

no not because of the leak but just what iv herd about the 25's all people ever tell me is that there bullet proof. are they kidding me?

Visionaree Explorer

Visionaree

Posted
  • Author
Posted
id rather pump a 20 all day long than a 25

After reading what people on here say about the 20 yeah i'm starting to agree. has anyone ever had a 20 rebuilt ? if so what did it cost and how long did it take ?

QUICKY Community Regular

QUICKY

Posted
Posted

dude u got a boost leak. i had a similar problem. bought myself an electrnic boost controller and presto, hold boost fine now :D.

why the hell would u change the motor when there appears to be nothing wrong with your current one?

Visionaree Explorer

Visionaree

Posted
  • Author
Posted
dude u got a boost leak. i had a similar problem. bought myself an electrnic boost controller and presto, hold boost fine now :D .

why the hell would u change the motor when there appears to be nothing wrong with your current one?

Oh OK thanks man. yeah im really really new to everything about these kind of things... i guess i jumped to conclusions too fast :) thanks dude i can sleep now lol

Adriano Grand Master

Adriano

Posted
Posted
dude u got a boost leak. i had a similar problem. bought myself an electrnic boost controller and presto, hold boost fine now :D .

why the hell would u change the motor when there appears to be nothing wrong with your current one?

So are you saying you got an electronic boost controlller to fix a boost leak?

QUICKY Community Regular

QUICKY

Posted
Posted

course not. but in my circumstance we eliminated the possibility of a boost leark (checked all hoses, intercooler piping etc),then changed the intake pipe to a steel item to illiminate it as being the culprit (by sucking shut),then even changed the turbo actuator. when all those failed, we installed a ebc (was running a turbosmart dual stage boost tap prior) and now she hold boost at 1.3 bar :(

Visionaree Explorer

Visionaree

Posted
  • Author
Posted
course not. but in my circumstance we eliminated the possibility of a boost leark (checked all hoses, intercooler piping etc),then changed the intake pipe to a steel item to illiminate it as being the culprit (by sucking shut),then even changed the turbo actuator. when all those failed, we installed a ebc (was running a turbosmart dual stage boost tap prior) and now she hold boost at 1.3 bar :)

Can i buy a steel intake pipe? or do you have to get them custom made? also will a steel pipe with a pod on the end make a flutter/dose sound??

QUICKY Community Regular

QUICKY

Posted
Posted

yeh u can buy them, apexi make a intake kit, but bit pricey. otherwise u can get one off ebay or ask any exhaust shop to make one up for u ;).

and yeh it flutters when u have a pod at the end of it

Newy Collaborator

Newy

Posted
Posted

fk me, If you wanna swap the motor because of what sounds to be a small boost leak of some kind, then your best to take it to a mechanic who knows what he/she is doing to find the problem. Just so you dont wind up paying $5000 for something that might only cost 50 cents.

Good Luck

adamskill Mentor

adamskill

Posted
Posted

mate instead of sitting on the computer typing on a forum, why not book the car into a performance workshop (surprise, there are plenty of them) and get them to give the car a once over. then u have peace of mind knowing that the problems have been fixed, and u didnt have to fork out 7K for a new engine. 14 pound with a stock 32 cooler isnt the smartest idea either..

Visionaree Explorer

Visionaree

Posted
  • Author
Posted

Thanks everyone :D i really appreciate everyone's opinion alot :cool: i needed it. Im going to go see a mechanic tomorrow in yatala. thanks heaps sorry if i wasted anyone's time on this stupid problem :)

Visionaree Explorer

Visionaree

Posted
  • Author
Posted

OH one more stupid question... How does a manual boost controller work? iv twisted the top the way it says to twist to turn it down but when i tested it its still hitting 13. i think i may have to turn the nut that's under the top too?? sorry... i work in a computer store and get these kind of stupid questions from customers all the time and i know how annoying simple stuff like this is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...