Jump to content
SAU Community

Recommended Posts

Got picked up last night for blue lights on my number plate but thats not the problem.

I got told i can't have 19" rims or higher. I said "what?" The cop says no car is now aloud to have anything larger then 18's since 4 weeks ago.

And he told me i can have neons on under my car at all times when driving as long as you can't see the GLOBE. Crazy!

Any one know more?

Link to comment
https://www.sau.com.au/forums/topic/289550-19s-and-up-now-illegel/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

^^ That's what I've thought for a while now, you're not allowed to go beyond 2" bigger than factory (unless you can use bigger rims, smaller tyres, to maintain the same circumference and not affect the speedo reading).

Good excuse to get those low-rider utes and bling show cars off the roads.

Yeh im pretty sure you will find the cop was either misinformed or he was just trying to find an excuse to sticker you. Did you actually get stickered or did he just let you know? If you did get stickered, i would go to the pits and find out the story, as im pretty sure Nic is right when he says they are legal up to 2" bigger, and then you have to use smaller profile tyres to maintain rolling diameter. If it turns out the cop was wrong, then i would make a complaint, cops really need to know what they are talking about when they go around handing out stickers and we pretty much end up paying a $150 fine trying to get it over the pits

Don't stress.. I am well known by tha cops. With how much of my time is spent dealing with tha cops, I had to of studied up on the law. How it was - anything larger than 2" from stock needed to be mentioned on the modification of vehicle form and be inspected at DPI. I can't say that this pig is wrong coz i haven't seen such sh*t, but the amount of times I correct the cops because they talk so much bullsh*t.. and having cars made factory with 20'z.. my guess is that he/she is dribblin sh*t to shake up the high performance scene! Honestly not worth talkin about, otherwise they HAVE made a difference. Although, they are very tight on this with the mini trucks because utes must have load tested wheels as they are commercial vehicles.

I was once pulled over for blue neon on my number plate and blue parkies in my headlight. The law states that your vehicle must have your number plate illuminated ( does not mention colour ). Therefore, I was made to change my parkies on the spot to avoid yellow sticker ( which only a dumb*ss wouldn't have ). And lived happily ever after!

Thirty FO

He said anyone with higher would get a warning then have a week or something to change them. He also said it's not illegel to sell them so dealers and tyrer shops can sell them.

I guess it's only a matter of time before the word gets around and people start getting pulled over more.

He did quote the law to me.

Lodge a complaint, a big one, make his boss's asshole bleed, then word will get around to not be a retarded cowboy.

Seriously guys, dont just take this shit and go over the pits, if you get stickered for legal mods of factory shit, give some verbal fireworks to WAPOL, preferably higher up, they did after all just cost you a day off work + money.

Edited by Nic_A31
He said anyone with higher would get a warning then have a week or something to change them. He also said it's not illegel to sell them so dealers and tyrer shops can sell them.

I guess it's only a matter of time before the word gets around and people start getting pulled over more.

He did quote the law to me.

He's just talking crap, I can guarantee that 19"+ rims are still legal.

Do you really think the DPI could change the law and not make some kind of announcement for the tens of thousands of car owners in WA with larger 19"+ rims.

On top of that don't you think the first people they'd need to tell is manufacturers and car dealers to inform them that every car they sell will now be conflicting with West Australian road laws. I'm pretty sure somebody buying a brand new GTR with 20" rims is probably going to want to know that his car isn't actually allowed on WA roads.

Seriously, the laws are: you can't have wheels any larger/smaller than 2 inches in diameter and then the same goes for rim widths.

If the law changes, you'll probably hear it from some more reputable source than some rogue traffic cop who decides to make up some crap to give you a yellow. When I got pulled over for an RBT not long after I got my car, I had a chat to a Senior Constable who I asked a few questions about what was and wasn't illegal, all the questions I asked were basic, straightforward things that anybody on these forums could answer; and he didn't know the answer to any of them. He had no idea if my pod filter needed to be secured, covered or if I was even allowed to have one. Most traffic cops don't know all the rules and a lot of the time they'll just be using their own personal judgment to decide if a car should be given a yellow sticker.

And spell illegal correctly.

:D

Oh and he's right about the neons, they're allowed, but you need to make sure you can't see the bare lights from pretty much any angle. And they can't be in colour combinations that could confuse drivers in terms of stop lights/headlights or police colours.

So generally no bright red lights on the back, no combination of red/blue and keep them mounted high enough so all the body kit/side skirting covers the lights apropriately.

Or even easier, take them out and throw them in the bin and you'll get pulled over much less often and avoid the chance of getting a yellow from a cop who's "best judgment" is flawed in respects to the Australian Design Laws.

Well seeing as you started two threads on the same subject:

You've been duped by a cop who "thinks" he can pull one over you. Ahh country cops, so "up with the times".

We are all governed by a national ruling NCOP14 http://www.infrastructure.gov.au/roads/veh...ng_3Feb2006.pdf

In summary we can not increase tyre width by more than 30% over stock (OEM) or placard.

So Front can go from 225 out to max 292 (rounded to nearest avail size 285)

Rear can go from 245 out to 318 ( or 315 next avail size).

You can have any size Ø rim as long as you maintain aspect ratio and the overall diameter of the tyre is not more than 15mm larger than stock.

Also the tyres must be load rated to suit.

I suggest you print it out, highlight the parts pertinent and keep it with you and if he hassles you again, show him the error of his ways, then bend him over and shove it up his a**.

Hallelujah brudda.................

P.S. If you call DPI they will tell you all traffic cops should be using the NCOP rulings now, and not what is on the DPI site as it's old info.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...