Jump to content
SAU Community

Recommended Posts

i just finished my 2years in the army and im currently a 20yo international student in perth and im gettin my P's soon. Do you think its a good idea to have a skyline for a first car? Whats the diff between a rear wheel drive and four wheel drive?

Is it better to buy my car from private sellers or dealers?

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/29031-just-some-questions/
Share on other sites

Hello and welcome.

for a first car a skyline is awsome.depends on how much dollars you have. you can pik up a nice R32 GTST for arounr 15 - 18 grand.

They also come in 4WD ( GTS4 Version , also turbo ).

but the normal GTST is RWD. the only differnce i would say is 4WD would be a bit faster and would handle better , but cant do burnout :P . and the RWD would be more dangerous , unstable in the wet i suppose. but its all up to personal preffernce and also comes down to the $$.

Thanks, hope this helpd

Hi xsoulx, welcome to aust and SAU.

I highly recommend you go out and test drive a few cars. At the end of the day, what one person thinks is awesome, another may think is average.

Rearwheel drive: only the back wheels are driven by the engine

fourwheeldrive: all 4 wheels are driven. with the attesa (nissan 4wd system) they are not constant 4wd, like the subaru are. the 4wd comes on when slip is noticed on the back wheels by a computer.

4wd generally will mean you can get off the mark quicker when taking off, also gives you a pretty big advantage in the wet, and was where the GTRs really came home when they competed in the touring car championships here is aust.

Skylines are great cars for all people. As with all people who are just starting to drive, know your limits, and dont think you are Micheal schumaker just because you have got your liscence for a few months and you should be fine. Its the driver that makes a car dangerous, not the car.

As for buying, make sure you get the car checked out thoroughly before you put a deposit down if you are buying private, and if you are buying from a yard, make sure they have aftersales backup and service.

You get more car for less when you buy private, but you can get good backup and piece of mind from business - they choice is yours.

4WD is faster how exactly?

in the wet and off the mark im imagining :)

soul, brother, theres no "good" or "bad" time to buy any type of car. if you can afford it - buy a fast european car! porsche 911, e46 M3, ferrari 355...whatever!!! you only live once dude :) the only reason why im not driving one is because i can't afford one :) so i drive fast japanese cars instead - which are cheaper :)

gets the power to all 4 wheels - 4 wheels pushing the car forward instead of 2 - faster off the line. that and the 4wd means GTR -->twin turbo --> more power

I think you need to learn more about how cars work. Not to mention why exactly a GTR has more power than a GTS-t. (hint: it's not specifically because it has an extra turbo)

hey gents, settle down, we've all had to learn these things at some time.

And for the newer members posting here, please keep in mind, if you are not *certain* of something...don't post as though it is fact. Other ppl may take what you say as gospel...

hey gents, settle down, we've all had to learn these things at some time.

And for the newer members posting here, please keep in mind, if you are not *certain* of something...don't post as though it is fact.  Other ppl may take what you say as gospel...

I don't have a problem at all with people that don't know stuff. I am more than willing to give advice and help where needed, in fact I like helping people :) But you covered what I have a problem with in your second paragraph - if I'm not sure of something I'll either say I'm not sure or say nothing at all. I don't go around saying things as fact that are obviously incorrect.

One thing that hasn't been mentioned here is that a person on P Plates is banned from driving a GTR by the RTA, hence the reason I bought my GTR at 21. This is the case in VIC, cannot comment for WA. You can ask the RTA to fax you a list of the 'banned' cars list.

But bottom line is that it's only illegal if you get caught and at a guess 2% of traffic cops could tell the diff between GTR / GTST. So go the R! U wont regret it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...