Jump to content
SAU Community

S14 With Neo Rb25 Drift Car.

Simon-S14
 Share

Recommended Posts

DJRIFT Veteran

DJRIFT

Posted
Posted

with Bens and mine we have an extra gasket due to the adapter plate. we spent heaps of time cleaning all the gasket and carbon ect off the things. they are very time consuming. i have also pulled the complete intake off a GTR in the car chasing a leak. that is not a fun job.

who flocked your dash in the end?

i was reading in HPI that you can buy cheap flocking kits off the net. no one does it in norther tas as some of the rally teams used to send there dashes to the mainland to be done.

just noticed you dont run a hydro. never felt the need?

  • Replies 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Simon-S14
Simon-S14

new motor on its way (from melb)

Simon-S14
Simon-S14

Massive thanks to Hypergear to assisting me with my turbo issues and rebuilding my 35R to ATR43 specs. I cant wait to drive the car with this!

Simon-S14
Simon-S14

yeah its more or less finished.... just waiting time to get it on the dyno at garage7 to get it tuned! some pics

Simon-S14 Grand Master

Simon-S14

Posted
  • Author
Posted

i had a hydro in the car when i bought the shell... did 1 track day with it before i ripped it out.. im not a fan of the hydro interfering with the footbrake assy. due to the way i drive with lots of braking/handbrake at the same time i just dont like it on the same circuit. In my KE i had twein callipers on the rear with an duel separate circuits.. that works brilliantly. Will be doing the same on the s14 soon. But really the cable handbrake with good pads works faultlessly

as for the flocking kits.. i got a local mate to do it for me.. he used an Ebay kit.

NA_Goodness Grand Master

NA_Goodness

Posted
Posted

Loving the build, mate.

I have an S14 I'm building up atm as well, and the dash is cracked in a few places. How well does flocking cover tthe cracks? Or is a whole new dash a better option? It will be a street car, so quality and looks are quite high on the agender for me.

Simon-S14 Grand Master

Simon-S14

Posted
  • Author
Posted

my dash was cracked before.. now i cant even notice it... it seems to have covered it pretty well! pretty happy with the outcome but i highly doubt the flock material is going to stand the test of time.

RBish: yeah the haltech has a inbuilt mapsensor, you can run up to 22psi before needing an external map sensor. as for the rewire.. its not for the faint hearted haha, im actually writing an article for drift battle atm on this very topic.

manifold is underway... should be finished very soon. its a work of art and a Garage 7 speciality item. it features a laser cut collector, equal length runners, a flange that bolts to either RB20/25 and Rb26 bolt pattern along with some other tricks..should work well!

295474_10150639276873785_699148784_9373896_874215765_n.jpg

Simon-S14 Grand Master

Simon-S14

Posted
  • Author
Posted

well found the cause of death and overheating on the old set up... i went to wire up the fuel pumps in the boot and thought i would prime the surge tank so it was full before i attempt to start it. manually powered up the lift pump in the tank with 12v direct from a battery and nothing happens... turns out its dead as it can be.. so last few events it has been running off the twin 044's alone and the suction from those pumps draws fuel into the surge. crazy, no wonder it melted pistons!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...